Hallo Philip, Welkom op het forum! De oudere Beomasters en ook de 2300 ondersteunen geen MP3 of andere gecomprimeerde formaten. Dat geldt ook voor de BS3000 en BS9000. Deze zijn allen ontworpen voor MP3 mainstream werd en ondersteunen dat ook niet. De systemen van de laatste jaren ondersteunen het wel, zeker de BS5 natuurlijk ;-) Bart

Did you try the XP-compatibility modus?

Welke tv heb je, welke mediabox van UPC en hoe is het aangesloten? Zonder deze informatie is er weinig zinnigs te zeggen. Bart

Bedoel je dat je de software niet kunt starten? Je dient een vinkje te zetten bij offline werken en dan kun je aan de configuratie beginnen. Het programmeren van een configuratie is wel aardig ingewikkeld als je meer dan alleen B&O apparatuur hebt. In grote lijnen ga je van links naar rechts door de tabbladen. Eerst een zone aanmaken (meestal maar

Hi all, All is up and running!!! Thanks for your help and support! It turned out that changing to channel 591 did the trick. Beside that I had to fiddle a bit with the Beo4 to work out how to change (and store!) the frequency on the MX4002. After finding out (the manual is not correct in that) how to store on program 60 it worked like a dream. Alas

Hi all, Thanks for your help and support!! @DoubleU: correct, I'm on UPC, and I'll give it a try this afternoon. (UPC: internet, telephony, and analog TV all ok, digital tv not so great...) @Morten: I hope the MX4002 follows the frequency automagically since I have no clue on how to change the higher program numbers..... @Vienna: Keying in 60

Hi Morten, Thanks for your answer! Your assumption is correct, there's only one aerial connection between the Avant and the MX. I'll give changing the frequency on the Avant a try. Is the information on the frequency send via Masterlink? I have no clue as how to change the frequencies on the MX so this is most likely the case! Bart

Hi all, My Beo5 has a not too tight fit between the display and the ball. Whenever I push a 'button' on the display, the display itself moves a little bit. Is there an easy way to tighten the fit? Regards, Bart

Hi all, I have a pretty standard setup which has a problem in the video quality over the (master)link to the bedroom MX4002. The signal is send from the video master, the Avant. I have a superb quality on the normal television channels on the MX4002, but the signal from the DVD or HDR1 is weak, filles with snow and low sound volume. The masterlink is

[quote user="rxcohen"] Then on the BEO4 remote you use the A-TAPE to turn on the BS9000 and start streaming data from the IPAD. [/quote] You saved my day!! I was using this solution with an Airport Express and a BS3000 but found out that A.AUX doesn't work via the remote (although the Beo4 can add it). It is of course very clumsy to start