Conrad sells the white supports. Item nr 542270 - 89. They are from PB Fastener.

Hello Andrew, My son allowed me to finish my RL 7000's this weekend . So, now I have 2 RL 7000's with repaired foam, new capacitors and 2xIcepower. The speakers are nice and precise. I have the impression the RL7000's are a good match for the ice200ASC. I also discovered the cause of the hum. It was the groundconnection. With a connection

Hello Andrew, My son allowed me to finish my RL 7000's this weekend . So, now I have 2 RL 7000's with repaired foam, new capacitors and 2xIcepower. The speakers are nice and precise. I have the impression the RL7000's are a good match for the ice200ASC. I also discovered the cause of the hum. It was the groundconnection. With a connection

Thx! The end of night's rest :-), but maybe a new beolover :-)

Hello, As mentioned above, I finished one RL7000 and just refoamed the woofer. I just have to fit them back in the speaker. But as I have just become father of our first son, my priorities have shifted a little :-). Soundquality seems good, but I'm no professional in judging these kind of things. I have a little hum in the tweeter. I'll have

Hi Andy, The wire running from the 47V point is the ground . I read the tip on the site of that Dutch guy. Pin 2 is the same as the ground hole in the centre of the board. I used the groundwire which is present in the B&O powerlink cable. Well I don't have a 'hum-sound', so I have the impression it works well. I didn't know that

Hi, I've (almost) finished my first 'beolab RL7000' (= RL7000 + ICE200ASC). There's a powerlinkconnection and a powersupply added at the rear and a led to the front (behind the speakercloth)! The ICE200ASC is next to the crossover. The caps of the crossover are also updated. I used Audyncap this time. Just because I could find most of

Hi, Amps arrived! A few questions: 1. I'm tempted to place to amp close to the tweeter (nice symmetric in the speaker) in the RL7000. Can the heavy magnet do any harm to the prestations of the amp? 2. The amps has the possibility to connect balanced audiosignal. I think the audiosignal in powerlink isn't balanced. But I believe the signal on

Andrew, Great, thanks. Postman with ASC's was at the door, but I wasn't home Kind regards Joost

Hi Andrew, You've got PM. I'm not that technical, but I was wondering if would not be a good thing to build a netcurrentfilter in front of the ASC200? Just to cleanup thing a bit before the current enters the ASC200. Joost