Yes, this is pretty much my problem, certain volumes and frequencies. Certain songs do it. The oddest thing is the pressing of the rubber cone cover fixing it. That's why I always assumed it was the driver. Dillen, if the driver is fine I won't bother opening the other cabinet. I'm just going to touch raw wire direct from the amp to the

I actually found a speaker with a polydome 3" in it that I could have bought today for $20 but the guy said it could be the crossover as well. Thing is the tweeter and woofer are just fine. And when I press the "condom" down tight over the dome the distortion disapears. I was going to buy your light kit for my BM 2400 soon, so a cap kit

I have a pair of s120s and they are amazing, but I'm currently getting heavy distortion from the midrange driver in one of them. I'm guessing it needs to be replaced all together but I'm open to other options. I believe it is a SEAS H226. Where can I find a compatible driver? I'm looking at this one currently and may replace the one

I'm actually wondering if they could be replaced with LEDs so they would never go out again. Since those are so low power there wouldn't be a risk of blowing anything out. Plus, they would be brighter.

I actually have the working lights from the unit I tore apart. Would it be possible to get the disassembly instructions, even for a fee? Thanks.

I have noticed that this thing is indeed very difficult to get in and out of. The mainbard being soldered to 40-50 wires that hold it in and keep you from the final screw that would take the touch controls off - if I'm looking at it correctly. Several of my lights are out. Is there an easy way to get to these that doesn't require forcible and

I'm looking at a pair of s55's that the guy selling them says needs a new tweeter. Where could I get a compatible one? I see some on ebay - one for the s75, one for the s45, and one that is unlabled except for "beovox" - but I have no idea if they would work. I think a tweeter replacement would be an amount of surgery I'm capable

Well, I checked the amp with cans and the antenna I have is doing nothing. Bad antenna port? I also noticed a hum in the tape and phono channels when nothing is playing. I'm hopinh its just the headphones jack. I only heard this thing in the shop with music playing.

I'm going to check it with the phones. I don't have any with a large size jack, so I need to get an adapter. No idea when my MC120.2s will get here parcel post. The lights look fine, though. They fade in and out, as does the stereo light as I tune around. Just doesn't get a good clean signal with or without the antenna.

That would fit. I wonder if I could get this , strip the bunny ears i have and connect the pal connector to it.