That is because Sky HD is using B+O DVI input or at least it should be. If it is using SCART or RF tuner input then you have a different issue.

PS3 will work with BV7 MK11 and MK111 Get a proper TV Tech` to instal the PS3 PUC code for operation with Beo4/5 MK11 can be difficult as it uses DVI in.This means you need HDMI to DVI cable with seperate component audio cables via the AV4 input. Use PC command and set the input to DVI. Set PS3 output resolution to 720p or 1080i You may need a revised

The black menu was available from software version 5.0 It went to 5.02.5.08.6.11 Latest version is 7.05 DVB HD is available on current models.

BS3 is the B+O flagship video engine and switching box. Also has home automation facility. Fully flash upgradable (Proper TV Tech only) BV7-40 MK111 and MK V has BS3 built in. Yes it is the best video source they make.

Avant is more advanced for sure. MX is a decent TV. Avant has weakness of the Philips CRT Grid Cathode short circuit issue. MX does not suffer from this. Avant is more expensive to repair.Chassis change as opposed to component level fault finding on the MX. MX repairs needs a qualified TV Tech` as well to repair. That said. TV`s should always be repaired

Modern TV`s are not designed to be repaired to comonent level. Specialist surface mount equipment would be needed and custom diagnostic stations. Many repairs are done via software flash upadates. There are not many of the old school TV reapair men left due to this but they still can make money repairing older kit and being up to date with their IT

Lovely TV . Gross price.

The scaler board could be an older version and needs the latest one with firmware and flash update. Job for a proper TV technician. Use black tape to stick down the PUC sensor when you have found the sweet spot.

Make sure you have Default speakers set to Video 5 and Audio 4 in the sound adjustment menu (Top One) IF IT IS A FULL PRO LOGIK SET UP. Then follow each stage of sound adjustment accordingly. This is the first adjustment you make setting up sound so make sure default speakers are set for what you are using. Latest software version is 7.05. You will

Yes indeed you can. Enter service menu then TV tuner. Make the adjustment in there.