Well, in that case I would buy it anyway, you can always add the Set Top Box Controller for a small incremental cost. Also, if you have the opportunity to test the AVANT before you buy it, then you can always go into the Service Menu and you can see the version number and if it does not have the version stated, then it is not installed. Also on the

It was an option, but most people had it installed. Does the seller not know if they have it or not ?

You are correct that the "Appleremote" is supported on the Beosystem 3, however the Beosystem 2 uses the latest STB tables 3.90 & 3.91 and I am afraid neither have the "Appleremote"

Your problem is related to PandP where the tool does not handle it correctly. Please send me your configuration file called "Configuration.xml" and I will look at it. I will send you a PM with my e-mail address so you can send it to me as an attachment.

Paul, Be aware that copying some functions and then modifying them can create problems due to issue with the configuration tool. However, you should still be able to achieve your goal with the "Cinema" button macro, but you will have to setup all the items manually, i.e. not copying a function like the lights. Are you using Lutron lights

Further to TripEnglish's statement, please be aware that changing anything to a command ending with ".." such as "AV.." or " Channel.." other than adding a logo will give problems, either serialisation errors or a subsequent blank screen where there is a sub-menu. So, as a general rule any command automatically provided

Send me your "Configuration.xml" file and I will have a look at it for you. I will send you a PM with my e-mail address for the attached file.

Sorry for the delay in getting back to you. Based on your last posting I would say that you either have a reduced cell in the battery or the display driver on the module has failed. Therefore I would take the following actions:- Reset the handset by doing Dot,7.0.0.0.9 OK then OK. Do be warned that this will remove you contacts listing in the phone

Well, I have done a bit of research on this one and the following appears to be the situation:- From a software viewpoint, both use the same software and both can be updated to the latest version of 16.2 From a hardware standpoint, the Mark III does have the addition of the PC input which would require quite a lot of changes to create a Mark III from

I think you will find this is what you are looking for:-