Peter, Whilst capacitors can be a problem and I know a lot of knowledgeable members suggest this as their first action, but given you say that even the Standby light is not on, which means that it is likely that you do not have the 300 volt line at pin 5 of T2 or it is low. I suggest, that being very careful you check the voltage across C9 which should

I am not sure that ***** has any distributors or retailers outside Europe, but you could send them a rerquest here -- *Link or reference to website with potentially fraudulent ownership removed* Martin Beoworld moderator --

Well, you now have a new Beoport, so that's good. Assuming you are running Windows XP on your Desktop, I suggest you do as Peter has suggested and de-install the Beoport software, then reboot your PC and download and install version 4.65 from HERE Then get back to us on the outcome..

Surreyone, Let me start by welcoming you to Beoworld and I am sure we can assist you in sorting your problem out. Lets start by a few observations from your posting. You say you lost everything on your Laptop and the shop re-installed everything on your destop. So, your desktop is now connected to the PC2/Beoport box, correct ? I am assuming from your

Actually, Peter's idea 1 is what I am implementing in my lounge with a false ceiling with reflected blue lighting around the edge. I am still working on this project and it is quite large and includes the expansion of other parts of our home. However back to Peter's idea 1 you will see from the pictures below that progress is being made, not

Let me start by making sure we are both talking about the same product, you talked about breaking into The Beo vision 6-23 & HD discussion, but in fact it was the Beo centre 6-23 & HD which was being discussed, whilst similar products, they are different. Whilst I understand Joeyboygolf and beobird point about HD on a Beovision 6-23, your point

It looks as if they have taken a previous design concept and added it to the bottom of the Beovision 4.

The Beocom 6000 phones sold in the US are different because of the different interface standard. They were sold in the US until around 2003 when they were re-branded for the North American market only as Beocom 1's

Sebastien, I understand that the kit includes the PCB 5 scaler module and an extra cable. It also includes a couple of software chips which go into sockets. After the kit has been installed the dealer then has to update the main software from his laptop via the Masterlink socket.

The Type 9213 is a Mark I version which without HD upgrade and therefore can only accept a PC via the DVI You can have an upgrade kit Type 4399 fitted which allows the DVI to be used as you want it. To get complete details of your configuration etc, why not look in the Customer Service Menu. To get into the Customer Service Menu, press MENU on your