Thanks for the input ipaul. I cleared away all of the magnetic components that I could find, taking all of the speakers well away from the set - no change noticed. Picture shape also seems to stay the same when the TV is rotated on its stand. Not having much luck with this one I'm afraid. Thanks for your contribution and I really hope that you are

Hi Chris First of all, sorry for the incorrect reference - it should have read P5 not IC5. I am afraid that my notes were wrong and they have now been corrected - well spotted. Bad news that the adjustment of those screws hasn't fixed the problem. I therefore conclude that the arm is arriving in the correct cueing position and stopping. At that

Good morning everyone Over the last twelve months, I have noticed that the picture on my MX7000 has started to become slightly tilted. On some days, it is worse than others and yesterday, it seemed to be about 10mm lower on the left hand side compared with the right hand side. This has now gone from an acceptable problem to an irritating one. My question

Hi I had a similar problem on my BG8002 which turned out to be related to the adjustment of the DC voltage on the photo sensors which form the basis of the << and >> manual movement systems. I reasoned that if the voltages were set too high, it keeps the solenoid in the raise position and doesn’t allow the arm to lower. The error in

Thanks Tomas Very helpful, at least I now know that I must stop fiddling around in the Menu system to try and find something!! It sounds as if the next step is to take the back cover off from the TV, find the chip and get some information off of it. I will try and do that sometime and then I might be able to find out what table is present and what STB's

Thanks Sverre The connections options in the setup menu of the MX7000 are very limited and there is in fact no mention of a set top box. According to the STB-C instructions, everything seems to be done under the V AUX source and I don't see any PUC list there. I'm still in the dark at the moment but that list must be able to be displayed somehow

Hi I have an old MX7000 which is fitted with a STB-C. What keys have to be pressed on a Beo4 or BL1000 in order to display the list of set top boxes that are covered by this particular version of the software? At the moment, I have tried Menu 0 0 GO but all I get is the software version 1.1. All ideas appreciated. Geoff

Hi Friedmett Yes, it is difficult to find a suitable stand for the 6000 and 8000 systems, so that is why I decided to construct one myself. I had one of the local metalworkers build the frame out of 25mm square steel section to the dimensions that I specified. It had an internal width of 154cm which made it large enough to take the three units in the

Hi Everyone I want to report that this week, I have officially completed all of my repair work to the various items in the enclosed picture. I now have a fully functioning 8000 and 6000 system, which by my standards works perfectly. Everything looks good and sounds great through the Beovox Pentas and M150’s. They even work wirelessly with NMusic

Hi Friedmett Brilliant - just what I wanted, now let the construction begin. Thanks for your help Regards Geoff