[quote user="bernd74"] I have found the hex ir-codes for VU+Duo Linux Settopbox. Its a RC5 Code. Can I send it per Mail? [/quote] Dreambox uses XMP protocol and VU+Duo uses Philips RC6 protocol

Since writing my last post I have managed to find the IR codes for these two products and I have made you two XML files as follows:- You can download the Dreambox DM800HD XML file HERE You can download the VU+Duo XML file from HERE Please test them let me know if they both work correctly

The directory which holds XML files for DIRECT control is:- C:\Bang & Olufsen\Beo5 Configuration Tool\ThirdParties As previously explained, if a member of Beoworld has not made an XML file for these STB's, then you would have to make one yourself or get someone to make it for you, but before you can make it, you need to find the IR command codes

[quote user="bernd74"] Where can i get a xml-file for VU+Duo or Dreambox? In Beo5 Config Tool is it not possible without PUC to remote 3rd party Products. Is it poosible to do a factory reset on Beo5? [/quote] When I and others talk about "DIRECT" control of a third party product we mean the IR signal goes from the Beo5/6 to the

If your third party STB is hidden in a cabinet, then your best option would be a Lintronics box.

Hello Bernd, The Beo5/6 can DIRECTLY control most (>98%) of third party products PROVIDED a suitable control XML file has been made. [quote user="bernd74"] How can I do a software/firmwareupdate with Beo5 Config Tool? It works only in offlinemode. There is no user and pass. I dont understand this. [/quote] Using the Configuration tool in

I have created an XML file for you based on the Logitech information which you can download from HERE I have added all the commands stated for the " Touch " and all commands not in the screen are assigned to hardkeys. Please review the file and test it and let me know how you get on.

[quote user="beobor1"] On the link you pointed there's also SRH: Special repeat header (timing: 9ms mark, 2.2ms space, 0.6ms mark, 96ms space. Where to put this? [/quote] Using the firmware generated NEC code as you have done, then you need to know about a flaw (software bug) in the repeat code section which means it does NOT conform to

I do not have and have not previously made an XML file for a Squeezebox Touch, but I can see HERE on the Logitech site that it uses a 32 bit NEC protocol IR string and I note that they use a device unit code of HEX 6E and helpfully they also provide it inverted for the second part of the address. The Beo5/06 is very good indeed in reproducing the NEC

[quote user="JSB"] Hello BeoWorld members, One of my LC2 Light Controller is broken-down. Does anybody has a circuit diagramm or service manual? Thank you for your feedback. Klaus [/quote] Klause, The Service Manual is now available for download...