Well, clearly an intermittent fault has occurred. If the picture goes black as if the TV is off and everything else is perfect including being able to change channel etc, then the most likely cause is a loss of the EHT (Extra High Tension) 25 Kilo Volts supply to the anode of the tube. The fact that it comes and goes most likely with heat means the

Surely you are not a fan of 'Eastenders' ? When Eastenders' starts I leave my wife to it and come up to the PC and login to Beoworld....

What exactly do you want ? Do you want information about the product and how it can be used with B&O Powerlink speakers ? Or, do you just want to know where buy the unit. If you want to know where to buy one, I suggest you review some of the German/Danish sites.

I can confirm that to update the STB controller table all you need to do is change one chip which is shown in the picture below. You need a plastic tool to remove the chip and an anti-static wrist band before starting any work. You will also need a splind screw driver to remove the board. Whilst not particularly difficult for the technically minded

If you have DVD controller Mark II with software update at version 1.20 then the following DVD's are supported:- Onkyo DV-S525 02 Panasonic DMR-E50 06 Panasonic DMR-E53/DMR-E55 07 Panasonic DVD-A360 01 Panasonic DMR-EH54D 16 Philips DVD950 00 Philips DVDR70/DVDR75 03 Philips DVDR80 04 Philips VR200 09 Philips HDRW720 13 Pioneer DVDR-3100 05 Pioneer

Well, I think you are correct... In the Beovision 3 Reference Manual it clearly states INPUT 1 Digital input socket (S/P DIF) for connection of e.g. a DVD player. INPUT 1 is for digital input from equipment connected to the AV socket on BeoVision 3. INPUT 2 Digital input sockets (S/P DIF) for connection of e.g. a DVD player. INPUT 2 is for digital input

Sorry, there is only software updates for the Beosound 9000 and the Beosound 3000 to allow them to support N.Music. The Ouverture does not have a software update to provide the N.Music functionality.

You are correct. A dealer may accept your Mark I version as a trade-in for the current version.

Let me give you an overview of Beolab 3500 and Beolink Wireless. First the Beolab 3500 has two variations:- LCS9000 later to become the Beolab 3500 Mark I which has MCL (Master Control Link) and ML (Masterlink) but NOT Powerlink and has a latest software version of 2.1. You can see the FAQ HERE on how to upgrade to version 2.1 software. The LCS9000

Like many products these days, the Beocom 6000 does indeed work using the 2.4 Ghz frequency band, and sometimes there can be problems, but in my experience they are few and far between. In my own home I have 6 Beocom 6000's, three wireless routers and several wireless adapters which also use the same frequency band, but without any problems. You