I am currently sitting down with my tea and a piece of homemade coffee and Walnut cake, but I still have not come up with the answer yet.

Ray, Your question is linked, but what I can say is that two versions of the Beocentre 1 were shipped with Beo1's and two versions with Beo4's as below:- Type 850X Beo1 Type 851X Beo1 Type 852X Beo4 Type 8531 through 8540 Beo4

I hear what you are saying and I do not know the answer to the question, but in my memory I kept telling myself there was a reason, but at this time I just cannot think what it is. I will let you know when my memory on this subject returns.

Whilst I will have to look into it to give you a complete answer, I always thought you could either have the Beo1 or the Beo4 set with the Beovision 1 & Beocentre 1, but not both. If you could use both you would have to ask yourself why the "Customer Service Menu" shows either a Beo1 or Beo4 as the remote. In all other Beovision &

The wattage drawn by the AVANT with VCR is actually 185 watts at 240 volts. The other member ( Link previously provided by Peter ) with the same issue purchased a 300 watt transformer because the AVANT does not have a large tolerence on mains voltage and if you purchase a transformer just above the actual current drawn it is likely to saturate and so

Richard, There are several B&O documents which describe option programming, but normally with pictures showing typical configuration, however the following may be easier to understand:- Option 0 = No IR reception Option 1 = Two IR-eyes in the same main room Option 2 = One IR-eye in the main room Option 4 = Link room product connected to one or two

The reason that the RED light coming back on and the set does not start up is caused by the safety circuit cutting in to stop damage to the set due to a fault. That's the good news... The fault could be many things, but by far the most common relates to short circuit transistors often the drive to the LOPT (Line Output Transformer) pulling to much

The error code means 22-2A 7IC1, SDA5273P Analogue Teletext processor which is not related to your problem. The error codes generated reflect status of various data buses and microprocessor connections, but cannot reflect the status of a missing EHT voltage unless there is lack of driver signal which would almost certainly effect other functions of

Keith, If you buy the chip upgrade you will need a plastic removal tool and an anti-static wrist strap. In the picture below you will see the location of the chip to be replaced.

The first two numbers relate to the approximate year of manufacture. 09 - 1994 10 - 1995 11 - 1996 12 - 1997 13 - 1998/99 14 - 2000 15 - 2001 16 - 2002 17 - 2003/04 18 - 2004/05 19 - 2006/07