Thanks, Andy So I think 5 is right and not 6, 4 I do not understand properly. But I tested 5 and it does produce the same error, the BV5 upstairs may turn on as well. Maybe 4 which I do not understand but also do not understand which of the 2 need to be 4, sounds like the upsatirs one?

I am clear on that but which is the one :-) - Andy 6 does not seem to be right? testing is tricky as it is not neccessarrily reproducable

all is masterlinked and the upstairs BV5 gives the tv+video and dtv signal down by coax loop

Hi Andy, option 5 for BS9000 does not really make sense? It should be only controlled via the TV as it is connected by ML only in the same room, optio 0 means no IR reception

Hi, It works with a 250 delay in between at least with the old software. With the brand new I cannot put a delay inbetween and therefore I cannot get the 4 funktions working. When I set delay it says error? This is how it was and should be 0.000.LIGHT.LIGHT delay 250ms 0.000.LIGHT.CNTL_STEP_UP but it shows: 0.000.LIGHT.LIGHT error! 0.000....... Any

I still do not quite understand the layout. The Beosound5 is a control panel. Is that linked to the Beomaster5 by a cable or is it wireless? Where do you have to position the 2 units? Is the connection just the ML or do have to connect it to the TV when you want to see pics? It is equipped with wireless, is that for internet access?

Hi @ all, I have several Zones with Beopassive and remote eye and also 2 Zones with a TV: In one zone and room is a BV5 in full surround config where the Video and the STB is connected to and is is set to option 2. The other zone & room has a BV7 with full surround setup which set to option 6 and Beosound9000 in the same room via Master Link set

Hi I am using 1.10 and do not know te FW but is it worth upgrading? What is the difference between the two, can somebody give a brief info? Is it right that all programming needs to be done from the start?

yes, it should work this way but how do we get the files and what files do we have to get exactly. If somebody can tells me exactly which files the dealer needs to copy I should be able to sort that out. Of course all that only makes sense if we know how to implement?

if you read especially the post by coolskin you may understand what I am after