|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Hej Bjarne, og velkommen til Beoworld ! Der findes flere forskellige kits til Penta serien: - Standard kit til Beovox Penta delefiltre Indeholder bipolare elektrolytter. Som originalt. - Opgraderings kit til Beovox Penta delefiltre Audyn Folie-kondensatorer. Bedre og teoretisk uendelig levetid. De to ovennævnte bruges også til Beolab Penta
-
Normally, the laser current is the only thing to adjust on the servo board - and that shouldn't be touched unless replacing the laser diode itself. Which type of capacitor did you mount in the laser output circuit C2103 ? It needs to be a blue Philips to work. Martin
-
-
Welcome to Beoworld ! Sure. You have a PM. Check your inbox at the extreme top right corner of this page. Martin
-
A couple of slightly different tuners were used through production of the BM1400K. The ones I see the most have an axial 0,64uF or 1uF capacitor (the blue one near the bottom of this photo) and no tantals. Make sure you get a suitable component for yours. Oh yes, - and don't adjust anything ! Martin
-
See this thread for an explanation as to why the members online counter can't be trusted: http://forum.beoworld.org/forums/t/31563.aspx Martin
-
Well, it could be the display iteself but check solder joints on the board, especially at the connectors and the display. Check the joints for the track number LED's too, they are often cracked. Note where all plugs and cables go, at least one of them can go in the wrong place (!) and destroy one of the processors. Martin
-
Welcome to Beoworld ! Wonderful radio ! The crumbled wheel is common. I haven't seen a good wheel in 20 years. Unfortunately, I have no other fix for it than to glue in a spacer in place of the missing wheel to prevent the pulling out of the tuning shaft, which would see the dial string falling off. I don't remember this tuner exactly, but it's
-
I agree with Peter though it could easily be a defect in the balance slider. The sliders are no longer available but usually repairable. Martin
-
They are not separately listed in my manuals but I think they are the same. Martin
|
|
|