caci: I wired RCA's ( which the Pentas have) to a 5 pin DIN. Am able to control volume from the Beocenter. I was wondering if when I get the Power Link Cable, will the ML1000 control the volume at the speakers. Thanks caci, But you don't have penta green display's showing source information that you are using on your BC9300. I believe if

Beophile, this sounds like a good Idea Perhaps then they can identify precisely what the problem is. Any time frame you have in mind? I'm still trying to find another TV with VGA input to get BS1 connected to - no luck so far. But I have sharp LCD screen which i will try connecting later this week.

Beophile, That is correct, there is only one HD Mod and it's a resistor - fixes pinkish picture on some screens. However it also fixes switching problem from 1080i to 480p. As it was described to me - BS1 without HD Mod would fail to recognize component inputs when switched from other source. Supposedly BS1 needed to be shut down and turned back

Beophile, There is a possibility that our BS1 bon't have HD Modification. Way to verify if HD Mod there is to remove black box with component cable inputs (2 screws) and using flash light to look diagonally towards left side of the opening. There should be blueish/gray or tan resistor if HD Mod has been done. I will have to look at mine tonight

This is interesting thread: I have Lab 8000 + Lab 2 setup and I think of conversion to Lab 9. I use it primarily for listening music. I have not yet listened to Lab 9 but it's good to know that these setups are comparable. The only concern I have is looks of BL9. I'll be honest looks are very important to me and I can't easily let go of

Michael, Would you please list your BS1 service menu settings when you can? I would like to compare software and chip versions with mine. Thanks David

Frank Rizzo, Try getting in touch with Atlantic Systems - they are on the east coast. Very knowledgable people and know B&O very well. I have dealt with Paul I believe. Give them a call explain what you need. They will be able to give tell exact parts you need to replace and will be able to ship them to you. I have fixed one of my BL7000 with their

The Stig - ver. 1.3: beoperson: I will definitely will look for these transparent boxes! Are they made by B&O? Yes you can get it at your dealer Great, good to know that. Thank you

Service menu settings on BeoSystem 1 US BOX SERVICE MENU Version - Box v4.7, May 26 2004, built Wed May 26 2004 - MCAD Id:17, Ver:1, Rev:29, PROM:3d - CCDB 4.7g MONITOR MONITOR INFORMATION 06 IC1 AP SW 5.o 14 IC707 FEP SW 2.1 BUILD DATE Feb 15 2005 BUILD TIME 15:21:48 ITEM NO. 11090000 SERIAL NO. 1529XXXX PICTURE ADJUSTMENTS WP-R 43 WP-G 41 WP-B 41

I personally think that you are right and we are both experiencing problem with Clamp Pulse or Sync Signal problems due to the size of the screen AKA "Dark Banding/Streaking". I may also try changing service menu settings on my plasma screen. These would be things to try: 1. Reduce the Image Size until you see the Active Picture area of both