|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Finde ich auch etwas arg teuer, die kleinen ICE Module kosten doch so um die 200-250 Euro... wenn er natürlich ALLES tauscht, zeugt das nicht unbedingt von Kompetenz.
-
It's quite the same problem like the BL7000. Caps on the lower board... caps with dirty black feet.
-
Looks like a direct hit in the power supply, so almost every chip and transistor is gone. No, throw it away, game over.
-
Ich kenne jemanden, der hat einen MX4000 im Bad und nutzt ihn auch beim Duschen... zum Gucken natürlich, nicht zum waschen Da beide noch leben, kann's nicht so schlimm sein...
-
Der einzige MX mit dieser Option ist der MX8000. Trotzdem kann man sich das sparen. Man sieht dann zwar das ganze Breitbild, aber die Hälfte des Schirms ist dann schwarz. Nutzlos...
-
The sliding door issue is a bad belt, just replace it. It's easy to do, just remove the glass, the side covers and then the rear cover. <> is a error message of the cd drive, it does not recognize a inserted disc. Usually the the drive itself is ok, but the 4 caps on the board of the drive are gone... replace them if it is a CDM12 drive. The
-
The fuse must be changed to a 50% lower rating. Which one to change? Try a multimeter? Must be connected to the red/black power cables. It's just 1 fuse in the primary circuit that should be changed, all other secondary fuses stay the same.
-
I would try this way.... Remove the wires between the coils and make the new green one. Move the black power line to the lower coil, at 220V The coils were parallel in 110V, now they must be seriell for 220V.
-
The transformer has 2 primary coils, in 110V units they are used parallel, in 220V units seriell. Post a better picture of the details on the second picture, cant see it right...
-
Ich habe noch ein paar neue und gebrauchte Avant Chassis auf Lager die ich nicht richtig zuordnen kann. Wennst ein richtig gutes Bild von deinem Chassis hier online stellst, kann ich vielleicht eins raussuchen. Martin Der Eldor DST ist auch kompatibel mit dem HR 8731 von Diemen, nur ist der auch nicht mehr zum auftreiben. Ich habe auf einem Avant Chassis
|
|
|