I think you may have seen it on the old Beoworld site which was lost. There was extensive pages of part numbers.

Richard, Yes its this little grey box we are talking about. They are basically the same as I understand it, so this information would be helpful.

The reason you are not getting many responses is, like me we do not have any answers for you. I have gone through the manual and clearly the key part which you are only going to get via the second hand market is the "Code Convertor Control Box" itself, everything else can either be made or obtained. Even if you had the part numbers and I have

It should be noted that these are LOGOS only without associated XML configuration files meaning you will have to apply them yourself from the LOGO directory in the Beo5 configuration tool. All Alex's source logos will appear in the directory called "Audio & Video Source" as below. If you have previously downloaded ALL the available

Member " Alex " has produced some more requested logos as below which are available for download from the Beo5 Information & Resource site. It should be noted that these are LOGOS only without associated XML configuration files meaning you will have to apply them yourself from the LOGO directory in the Beo5 configuration tool. All Alex's

A warm welcome to Beoworld.. I have had a look at this "Supplimentary Guide" and whilst it is 8 pages in size, it is just four short paragraphs repeated in all the common languages. It says:- The following information supplements page 13 in the Guide. If you use BeoSound 2 in Mass Storage mode, or load the SD card in a PC card reader, the

Stan, As far as I am aware Bosscom does not have any US resellers, a business opportunity for someone. However, I never use Masterlink junction boxes because they use the "telephone" type push connectors which tend to quite often provide poor connection because you do not strip the wire, it goes through the insulation as you push it home.

Allez voir ICI

Below is what Razlaw means:-

The two 8 ohm speaker sockets on the back use standard speaker plugs like the ones HERE Electrically, the speakers connected to these sockets put the external speakers in p arallel with the internal speakers.