Jeg ville selv foretrække en tangential model. De er generelt ret gode allesammen. Når det så er sagt, og jeg fik valget, ville jeg helst have en Beogram 4000/4002/4004/6000, alternativt en Beogram 6006/8000/8002. De nyere modeller (3000-9500) har lidt for meget plastik og jeg synes, det kan fornemmes når de spiller, dog klarest

Welcome to Beoworld ! To play a 12 inch record on 45rpm, on some decks, you will have to start it by pressing 45, catch the tonearm before it lands and manually take it back and place it at the lead-in groove. If you start the deck at 33 (to get the 12 inch landing spot correct), you cannot change to 45 on all decks. Martin

It's always a good idea to clean the lens and it may do the trick. If not, your CD deck will be in need of new capacitors. A kit exists but it does require some electronic skills and tools to replace the lot. Shouldn't be too costly a repair though. Martin

I am looking for a working Beogram 8002 processor (CPU). Would consider a whole module, a whole board or even a whole Beogram for parts. I'm in Denmark but will of course pay for the item plus shipping. I am always looking for tangential parts so I would also consider Beogram 4000/4002/4004/6000/6006/8000 parts/machines but my primary need is the

Welcome to Beoworld ! It could be the belt but in most cases the symptoms of a worn belt is wow rather than a consistent slow speed. There are two holes in the black plastic bottom plate through which you can access adjustments for 33 and 45 respectively. You must use a 2mm flat-bladed "watchmakers type" screwdriver. If the speed cannot be

Looks like a B&O stereo decoder to me. Check the number on the solder side, my guess is 6140099B. Didn't you replace the caps on the stereo decoder ? (Or didn't I send some ?) Good job on the clutch and IF transistors ! Martin

Sami, Yes, a kit is available for this version. You have a PM (check your inbox). Martin

I can only echo what Mika already said. It's in the way the amplifier is built. They will all give a pop of some kind when powered on (and sometimes also when powering off), some more than others depending mainly on the condition of the output stage and power supply capacitors (the large cans) but also other capacitors in the Beomaster. In some

Idle current settings ? Replace the trimmers and readjust to factory specs. Do the DC offest trimmers too. It's very common to see the trimmers go bad. They don't just go out out adjustment, they lose contact. Sometimes they are even found physically broken. Martin

Du kan spørge Axel, men jeg er meget sikker på, at den ikke kan repareres. Martin