Apparently, all dealers were informed some weeks ago that the DVD2 has been discontinued and whilst they have a few left in stock, once they were sold, it would be the end of the product. Certainly there will be no updated DVD2 because it is not even made by B&O

As many of you know the BBC in the UK made all its UK channels available via the Astra satellite sometime ago followed by ITV. Now Channel 4, Film 4 and Film 4+1 have been put on Astra 2D satellite making them available to most parts of western Europe. It is the first time Channel 4 has been available "Free-to-Air" on satellite and suggests

Unfortunately, the forum was down twice this morning to allow "van" to add more coal and get up full steam for the draw.

They are not going to do anything with your "construction flaw" particularly as it is a discontinued product.

Toby, The problem is likely to be caused because one unit has the old Masterlink module and the other has the new Masterlink version. Ask your dealer to check it for you by serial number.

The latest software version for an AVANT DVD Mark III Type 8460 is 16.2 The latest software version for Mark I & Mark II DVD AVANT's is 10.4 The software versions can be check in the Service Menu by:- Press MENU on the Beo4 Press SETUP Press 0 then 0 then GO

Very well done, now you have a fully working AVANT

A warm welcome to Beoworld.. What B&O product are you trying to connect your iPod too ?

Scott, Yes, the RF Link distribution output is "Analogue" and at present B&O does not provide an HD solution on link TV's other than have a STB directly connected to the HD ready Link Beovision.

There are two (2) current versions of DVB decoder namely the DVB-T and the DVB-T/S. These decoders only decode MPEG-2 which means not HD The DVB-T can be fitted to the following Beovisions:- Avant DVD 32" BeoVision 3 32" BeoVision 5 BeoCenter 6 26" BeoVision 6 26" Avant DVD 28" BeoVision 7 32" BeoVision 7 40" The DVB