Dein BV7 sollte videomaster und Ouverture audiomaster sein, beide in Option 2. Wenn du vom BV7 aus alle Video- und Audioquellen steuern kannst, ist er in Opt.2. Das gleiche gilt für die Ouverture. Laut Beo hast du eine sog. 2-Raum-Aufstellung... Die Mute-Funktion läuft über Pin 1, meine ich. Stefan

Hi, thanks for the info. I think, Greg and beoaus are both correct. You will need the 441 as a switch, and 442 if you have a projector, because the 442 is a splitter too. http://www.gefen.com/kvm/product.jsp?prod_id=4341 Maybe you can use this in a setup with beomedia 1(?). BTW: Does anybody know, if I can install the apple-tv/ipodremote ir-codes into

Connect your 238 box on the harddiscrecorder side, 10 m is a long way, but I think it works. If so, you don`t an Infrared Emitter at all. They are built into the box. Good luck. Stefan

Audio and video in option 6 in the same room won`t work, because both systems react to both commands. So, if you press "1" you will get "11"....if you press "up" you will get up twice... Stefan

If you want AV-CD on Beo 5, create a button that sends CD in video mode: 0:000:TV:CD. The same if you want AV-TV: 0:000:RADIO:TV. Hope this helps Stefan

@ stefan: in meinem Panasonic-DVD und in meinem Samsung DVB-C sind ja auch Ulf Kiener`s Controller, funktioniert superklasse. Nur eben dann nicht mehr, wenn ich keinen B&O-TV mehr verwende Ich habe auch einen DVB-S Empfänger mit eigenem IR-Auge - auch von Ulf- funktioniert auch superklasse..... Stefan

Which Link-Tv do you have? I can call up my PC - Beomedia 1 - on my BV 6-22, I can`t do that on my MX beovisions, not on my MCL 2As (Extra Speaker Kits) and not on my BL 2000. But I can call it up on my BL 3500 ...(???). So. I think, all the products - MX, MCL 2A... do NOT detect the command "PC" or "L-PC". But the newer products

Hi Frank, the IR input on the Lintronic box is a 3,5 mm jack connector at the back of the box called Input, ext. data input, infrared, RF,etc. http://www.lintronic.dk/TableTopVersion-Technical-005.pdf You need a 3,5 mm stereo jack, but you only need 2 pins: B= IR signal, C= Ground. http://www.lintronic.dk/InfraRedReceivers.htm#1455 You connect IR signal

The SCART-cable just sends commands in the video mode you defined for the AV socket. If you choose V.MEM for the socket, the -238 box only receives commands in V.MEM mode. I noticed one problem in my BV7-40 MK II setup: DVD2 mode (V.TAPE2) is detected as V.MEM. But that doesn`t really matter. I also tried to send and receive commands on masterlink via

Yes, you need analogue video signal for linkrooms. That`s why the Beomedia 1 is connected via vga AND composite to the videomaster. And if you have a BV6-22/26. BC 6-23/26 in your linkroom press Link - PC (L-PC). PC is activating the link-TV´S PC input. Stefan