Good job ! And thanks for the feedback, greatly appreciated. Martin

You do realise that it won't start without a record...? Sorry for asking, but it's no secret that a lot of owners don't know. Martin

A thing I've often found a bit funny is, that whereas the Beovox X35 generally is considered a quite poor low-end speaker, the Beovox S30 (type 6317) is often considered to be a fairly accepted speaker in its own right. The S30/X35 cabinets are of the exact same size and build, only difference being that one is veneered and the other has grey'ish

Peter, the frequency curve starts at 2KHz so is not showing the bass response but merely the lower range of the tweeter. But I agree that it looks a nice result and I'm sure that we would all hear a 3dB increase in treble amplitude, not to mention the 11dB increase around 4,5KHz. Having said that, the Beovox S45 would not be the first one I would

If your post title was something incl. Beolink 7000, I'm sure he would come and visit it but as-is, I'm not sure it will catch his attention. Quite surprised it caught mine, actually. Contact him directly, he won't bite. Or post a new thread with a different title. Martin

Hard to diagnose any further per remote, I'm afraid. I suggest you bring it in for service. Martin

Welcome to Beoworld ! Check that the front panel switch (a tiny board with two leads going to it) is in it's correct place in the vertical slot behind the front at the right side and will produce a little click sound when pressing the front panel "start" button. Check that no wires are trapped inside when the right screw is tightened.

He did it... . . . . . . . . Wonderful work ! Martin

I can also do SMD work, contact-less soldering etc. but as I haven't had that many BL7000's in my hands, I'm afraid I cannot give much advice. Die_Bogener, I believe, will be your best shot. Or maybe Ulf (most active in the german section). They have made many as far as I know, and I think they both, or at least Martin (Die_Bogener), has

I'm sure, I can find one. Did you get my message regarding the Beomaster 1700 tuner ? Martin