Hallo Schrauber, Auf der Geräteunterseite sollte eigentlich ein Aufkleber sein der erklärt wie man die beiden Plastikteile rechts und links ausklinkt und dann nach hinten wegschiebt. Dann tauchen die restlichen Schrauben auf... Gruß, Gunther

Hallo Chris, hab gerade mal an meiner gemessen: Kurz nach dem Batterieeinlegen zieht sie ca 1mA - bis das Display angeht. Dann geht's runter auf 10uA. Bei 1mA sind Microbatterien natürlich sauschnell leergesaugt. Ich tendiere dazu das da noch was anderes faul ist. Vermute das 1mA der normale CPU-Strom ist solange die läuft. Sollte dann

[quote user="Jonathan"]She's a bit young for Ev though...[/quote] Don't mix up avatars with real life

@Soren: [quote user="Søren Mexico"]BTW, I've been shopping around for wirewound R 0.39 Ohm for my 901, there are 2 types, 1 square ceramic white, 1 looks like a fireproof[/quote] Yes there are 2 different ones in the 901. Looks like one of them is bound to burn in case of a fault in the power output stage. That's the grey, smaller

[quote user="Evan"]100/35 = 100uF, 35V right?[/quote] Yep. First uF, then voltage. I'm not worried about the middle one in mine; the bulge is a sort of rupture joint "valve" (I had to look that one up in my dictionary ) where pressure can exit if getting too high. If it's not open it's still ok. Modern caps have a sort

[quote user="Evan"]1) Should I desolder the caps or is applying heat to unstable caps not safe? Or should I just clip the wires?[/quote] I just desoldered them - no risc to explode as they look like they have no more capacity anyway Might smell a little strange though - open your windows [quote user="Evan"]2) What are [or who makes

As I've missed the 2007 chance me & Susan would be in it, too. No timely restrictions (yet). Looks like it will be overbooked within minutes Gunther

Hello Rich, I recently bought an BM4000 and it had very weak output on both speakers. Reason was - as you could imagine - a cap problem. The 5000u / 70V had a measured 0.12uF capacity left. Looking at the bottom it was clear it had vented... I still haven't received the spare parts but using a 470u/100V (biggest cap I had with >=70V) brought

Hi Soren, Any progress? I think the TIP122 / 127 will be fine, their Umax specs are better than the 120/125 that I used. Don't think they will sound different. And the 1N4148's and rest of the semiconductors are not a real price factor. Those ERO caps are not that critical; cap problems are mostly related to electrolytics. And you can use the

Here's what I found in my (german) "from vision to legend"- booklet (the small one, not the "big book" which I don't own...) so the BEOmünster seems to be not uncommon But, frankly speaking, I didn't recognize that before it was mentioned here On the other hand, on another station there seems to be an "A"