Die Anführungszeichen habe ich nicht übersehen. Wenn ich das richtig interpretiere ist auch der Standby-Strom der LS zuviel Belastung. Wäre es dann nicht die einfachste Möglichkeit diese über einen Schalter nur dann anzuschalten, wenn man diese nutzen möchte? Bei der Wiedergabe müsste die Belastung doch ziemlich gleich

Na das mit den Stromkabel "quer über die Betten" versteh ich nicht. Die LS haben eine eigene Stromversorgung und die läuft normalerweise nicht quer über die Betten. Im Betrieb laufen über die LS-Kabel nur Preamp Signale, was meiner Meinung nach weniger Elektromsmog bedeutet wie bei Passiv-LS. hfat

Hi Hiller, The BM1 serves three commands: N.Music/Radio which are audio commands and PC/V.Aux (depending on configuration) which are video commands. N.Music/Radio is used togehter with an N.Music compatible audio master and is controlled via masterlink. Sound otput goes via masterlink. So it is absolutely correct that you don't see a userinterface

Hi Paddington, I had the same problem and the solution that works for me is: The macro assigned to standby hardkey containing 3rd party IR codes must be terminated by a b&o standby command. hfat

I couldn't resist and moved from Beo5 to Beo6. So I had to upgrade to 4.11 allthough I initially didn't want to. I am really pleased with the new version, because there is no need anymore to modify the configuration.xml manually. I created my configuration from scratch an discovered some new features of the tool: After creating the configuration

Hi Hiller, Yes, that's correct. I've just seen the manual of the BS1 US version. I think it will be the best solution to connect the BM1 to the V.AUX socket (video and sound). You will then need the additional IR-Eye to control the BM1. In the BM Setup you have to setup BM1 to listen to the V.Aux command. Did you check the BM1 is working correctly

I have a BM1 connected to BS2 and it works very well: There are different options to connect depending on the SW of yout BS1: If your BS1 knows "PC"-Sources you don't need to connect the IR. You should connect via ML. In this case the BM1 registers automatically as "PC". Just try to assign "PC" to any connection in

hallo zusammen, Ich habe meinen neuen BV10-46 gemeinsam mit 2 BL1 und 2 BL6000 als Nachfolger eines Avant seit ca. 2 Monaten in Betrieb. Irgendwie habe ich keine passenden Einstellungen gefunden und immer den Bass vermisst. Die Leistungsdaten der BL1 sind am Papier ziemlich vielversprechend, nur habe ich bis dato nichts davon bemerkt. Heute habe ich

Thank You for your replies. For me the backlight problem isn't a problem at all. In most cases I use the config tool "offline". So for me I think I will continue to use 3.87 and wait for the next release. regards hfat

Hello, I recently did some tests with the version 4.11 of the config tool. I worked on a standalone PC and did not connect the BEO5. There are some problems I discovered regarding compatibility of my configuration files. The new tool looses the manually created settings of step "edit". Loading a configuration the tool acts as if you modified