It is likely that your Beomaster 7000 has a power supply problem, certainly check fuses, but even if a fuse has blown we need to understand what caused it. I would not connect your MCL to the Beomaster until the problem is resolved in case the fault may cause damage due to incorrect power supply voltages. Are you a technical person who could do some

The Beolab 3500 is a very good product particularly for background music when you are ironing. It WILL switch on using the A/V and volume on the Beocom 6000 and with other beocoms Opman: Another useful nugget of information is that BeoLab2000 can be activated by the volume control on BeoCom6000. If the speaker is in standby mode and you turn the volume

Dan, I was coming to the ADSL filter, so well done for working that out..

The latest phone software is version E910XXFI1 where XX can be anything

Well, that means one of the following is most likely to be causing the problem:- Either pin 2 or 5 of the phone plug from the base is open circuit. Check the phone plug connections at both ends of the phone cable and make sure the RJ11 plug at the other end is firmly plugged into the base. The base was not previously used with the handsets and the software

Dan, Are you getting "Line Busy" on all Handsets ?

You did not seem to finish your question...

The Beo5 will in the future support 3rd party products, but is not a learning remote. Below you will see two (2) of the three (3) IR transmitters noted, but no receivers. It supports Beo4 IR protocol, Beo5 IR protocol, RC5, Bitstream, NEC and Raw The current version of the Beo5 Configuration Tool has an area to read 3rd party XML files, but none currently

I am pleased everything is now working and quite important for other Beosound 2 users as the simple solutions are sometimes overlooked.

Faninka, You can put a TV card in your PC and link the RF (Link) from your master Beovision to the aerial of the TV card and PROVIDED you have at least one other link room or a Beolink Passive you can watch the TV on your PC without the Beoport. However, you will only be able to change channel and other functions via the other link room or via a Beolink