Yes, 2 audiomasters are not possible. But you can configure your BS4 as a local source in option 6 as said before. BS 9000 in option 0, BS3 in option 2. In this setup you should be able to access (in the BS4 room) the BS4 radio/cd by RADIO, CD, the BS 9000 radio/cd by LINK RADIO, LINK CD, the Beoport by N.MUSIC, N.RADIO and video sources by TV, DVD

Graham is right. Maybe for ice powered speakers you will need a PL MK III wiring, which means PIN 3 and 5 for L-R audio, PIN 2 ground, PIN 4 for speaker on/off, and PIN 7 for (ice power?) ground. More info by Peter Pan: http://forum.beoworld.org/forums/thread/1624.aspx Stefan

Für den BM 7000 brauchst du einen Beogram mit RIAA-Verstärker, z.B. BG7000, 6500, 4500,3500. Die sind dann auch per remote am BM 7000 und im Link bedienbar BG 9000, 9500, 3000, 3300, TX...etc. funktionieren da nicht. Stefan

Same problem here - just black bars on my macbook... Stefan

Nein gibt es nicht. Wenn du dein sonstiges Setup behalten willst - Beolabs, HDR, BC2 - dann hast du mit Powerlink, Masterlink und Datalink im SCART zu tun. Wie willst du das alles umgehen (vernünftig)? Wenn es dir um die Preise von Beovisions geht, dann ist der Vorschlag von Ralf doch super. Die Röhren-TVs sind wirklich günstig zu haben

Hi Yann, you are right, this function does not exist in the config tool, but the command is in my Beo5 setup for the PandP function. You can type the words into the command field and create this way a new command. Sorry, as I said before, I can not test the button, because I don`t have the BV with PinP. Good luck Stefan

No, backlight is activated by a little sensor inside the Beo4. You can hear it if you shake the remote. Cinema activates cinema view in BV7/9, BS3, which means close the screen, turn the stand to audio-position, activate SPEAKER 5 mode... If you have a cinema control module it closes two contacts (which can close doors, windows, curtains, activate popcorn

Hi Yann, try to create a button with a macro. First command is: 0:000:TV:PICTURE_IN_PICTURE, second is: 0:000:TV:CNTL_REWIND. This is the command for PICTURE IN PICTURE - GREEN. If this works (I cannot test it, because I have no 1 way Beovision with PinP module), create 3 buttons for red, blue, yellow. Good Luck Stefan

1- Make sure the Avant can NOT receive any IR commands while programming option 4 to the BC 6. Otherwise both TVs will be in option 4. 2- I think the advantages of Beo5 are: you can create your own buttons with special functions or macros but only in B&O sense. If you want to control non-beo-products you have to use an IR converter (Lintronic) anyway

Masterlink -Verbindung muss vorhanden sein. Der SPDIF-Ausgang der BS 9000 ist für den Anschluss an die BL 5 gedacht, nicht an BS 3. Wenn deine Lautsprecher am BS 3 hängen, dies in option 2 und BS 9000 in option 0 (wird normalerweise automatisch angewählt, wenn die Powerlink-Augänge nicht belegt sind). Es gibt 3 (4) Quellen auf der