Found out: go to home page, log in, check, change my account details, upgrade to, in my case gold, and thats it, or make a new account with another name and mail

I did, they tell me there is allready an account of that name, and no. I want my cap and golf balls.

The women in the com. looks like my mother when I was 12 years old, an old lady, and not to happy, at least she should look happy and maybe younger, and a TV with naked spaekers. No, this one was for the danish market, young people in DK do not buy Beo until they reach the age of my mother when I was 12 years old. Listening to the sound will give the

I'm trying to upgrade to gold member, how to ?? I want to win at least a cap or something.

Try to move up the PCB with the switch, up until its free of the lever that actuates its, then check with an Ohm meter that you have no connection between the legs, if thats OK its not the switch. If the switch is bad it will not mute.

Got a good answer from Martin (as allways), but I'm kind of lost here: BG 6500 Pressing play I check the current for the lamp inside the tangential drive, "0", I check on PCB with the muting switch "0". Wtih disk and no disk. Could it be the S3 contact ?? I check the platter motor: On PCB 1 at Jack P5, pressing start I get: P5

Vinyl is black magic, and I may inform you, if you don't have the Beovirus now, you are on your way to get it.

Jaques You did so many fine repairs on it, dont stop now, change that foam, if the motor has kontakt to a hard surface you vil have noice and the foam has the same age as the TT, think about driver foam, same sh***

Hi Martin Tried with 45 and 33, and without, same result, the mecanical side is ok, pressing start I move the platter by hand, and the tang. goes to 33 or 45 whatever is on the platter, also with the correct distances to center. but its like the platter motor do not get enough power it only jucks a little and then nothing. About the parts, you will

Got to the flywheel from the BG today, took of the center plastic piece and set up the wheel in my lathe, first checking the center shaft for damage, Measuring 0.005 mm. circumference difference, but that may be my lathe chuck, the outer ring on the wheel is another story, 9.0 mm up-down difference, band surface 0.5 mm circumference difference. With