Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Search

Page 15 of 19 (182 items) « First ... < Previous 13 14 15 16 17 Next > ... Last »
  • Re: BC1

    Ik ben even naar de dichts bijzijnde dealer geweest en heb een onderdeel besteld. Eventjes wachten op het onderdeel en dan ben ik benieuwd hoe het er uit ziet. van binnen.
    Posted to BeoWorld Dutch (Forum) by EOB on 11-19-2007
  • Re: BC1 suround 5.1 module

    Thank you for the reply Stig. I managed last night to squeese a small O ring on one side so its stuck and wont fall off and it wont damage anything. In the end I was able to look some TV. Today I ordered a new part at the nearest dealer and in a few days I will have ago at replacing it. I pondered if I should screw some small screws in the lid but
    Posted to General Forum (Forum) by EOB on 11-19-2007
  • Module Surround 5.1 detachment from BC1

    I am trying to take off the module of the surround 5.1 of a BC1. Due to the fact that some ( the upper ) of the attaching pins are broken the module as it is top heavy keeps dropping off. I still have the original cap with out the module which doesnt need the pins and until I have ordered a new part I want to use at least the unit for TV etc. If I can
    Posted to The Workbench (Forum) by EOB on 11-18-2007
  • BC1 suround 5.1 module

    I am trying to take off the module of the surround 5.1 of a BC1. Due to the fact that some ( the upper ) of the attaching pins are broken the module as it is top heavy keeps dropping off. I still have the original cap with out the module which doesnt need the pins and until I have ordered a new part I want to use at least the unit for TV etc. If I can
    Posted to General Forum (Forum) by EOB on 11-18-2007
  • Re: BC1

    Het lijkt of de afdekplaat uitstekende palletjes had die in de bc1 verdwijnen. De afdek plaat/kap heeft nu geen uitstekende pallen ( aan de bovenkant ). De onderste haken zijn wel in tact. Ik weet dus niet meer of er eigenlijk uitstekende pallen waren aan de bovenkant van de afdekplaat. Wanneer ik hem ietwat hard dicht doe dan blijft hij wel zitten
    Posted to BeoWorld Dutch (Forum) by EOB on 11-11-2007
  • BC1

    Bij het verhuizen van een BC1 is het mij opgevallen dat de achterklep waar het surround 5.1 gedeelte inzit open viel. Bij beter kijken lijkt het erop dat er pinnetjes zijn afgebroken? Is zo`n kap in zijn geheel te vervangen? Ik heb hem ooit zelf aangesloten maar ben vergeten hoe de achterklep open en dicht ging? In de beschrijving gekeken maar daar
    Posted to BeoWorld Dutch (Forum) by EOB on 11-11-2007
  • Re: Beotalk

    Well it was advertised as beotalk 1500, when up for private sale. But same as you, I wondered if it was a 1401 ? from the booklet it says the following; Beotalk forms together with a Beocom 1400 or 1500 a combined phone and answering machine. So from that I gather it could be a beotalk 1500. Basicly I think it looks like the beotalk 1400 ( the difference
    Posted to General Forum (Forum) by EOB on 10-31-2007
  • Beotalk

    I have purchased a second hand beotalk 1400 / 1500. Reading the book that came with it I think i miss a "transformator". adapter Also there are two plugs one from the answering machine needs to be plugged in the line socket. secondly a plug ( according to the book ) should be plugged into the base of the phone? problem is i dont see a proper
    Posted to General Forum (Forum) by EOB on 10-31-2007
  • Re: DVD2 vs HDR2

    Karel ik ben toch even benieuwd wat je kritische noot is betreft de bc1. ik ben zeer tevreden naar het functioneren ervan ( een kleine note dan vreemd dat de dvd slede niet per remote kan worden bediend om uit te treden wanneer er al een dvd in zit ? ) Maar nog steeds benieuwd!
    Posted to BeoWorld Dutch (Forum) by EOB on 08-30-2007
  • Re: info apreciated

    Thanks for the replies. Very helpfull indeed. I bought the HP dv 9595ed laptop but due to other obligations I didnt get around to the futher installation yet. I ordered a HPc7180 all in one printer but I got a reply that its status is 'end of life ' I havent got a reply back yet from hp, what will be the replacement printer for that matter so
    Posted to Beo-PC (Forum) by EOB on 08-30-2007
Page 15 of 19 (182 items) « First ... < Previous 13 14 15 16 17 Next > ... Last »