Keith Saunders: you will have on your screen V.AUX and AV.. and if you press V.AUX followed by AV.. it will effectively give the A-V.AUX. I've tried this first sequence with beo5: press V.AUX followed by AV.. and the avant screen doesn't switch off I've tried this second sequence with beo5: press AV.. followed by V.AUX and the avant screen

Hello everybody, I need help again! I'm trying to find the Beo5 IR codes equivalent to the beo4 command "A-V.AUX". I want shut off the avant screen while listening music through the V.AUX input. I've already tried this: including "V.AUX" inside the "AV" screen and also the "Picture_toggle" beo5 IR command

The problem is that the BD10 has some rather bad reviews- one of the slowest load times- up to 2 mins, poor build quality and is being replaced very soon All is absolutely RIGHT! Some of the films taken even more than 3 minutes to start !!!! even going straight forward to begin quick Build quality is near BAD and certainly a UGLY device absolutely to

355f: Would you say the sound is superior to B&O standard dvd in 5.1?? I hope you remember well what I explained you about Panasonic Blu-ray and BS3+BV4 demo at my dealer shop. I´ll talk now only about the sound: The difference that all of us (5 persons including Beo-people) felt between the DTS-HD audio track and the DD5.1 audio in the same

The Stig - ver. 1.5: The code looks like this: 0:000:TV:PICTURE_FORMAT+0:000:TV:WIND This macro doesn't work for me. Neither "step_up" or "cursor_up". I have a computer IR receiver that can detect and show me all the IR codes sent for the beo remotes, and the most strange thing in this case is that both beo4 and beo5 are sending

The Stig - ver. 1.5: What tv is the remote set to control? mine is BV7 and there it's present So do you can use the beo5 to change the picture sub-formats in the BV7? ( 14:9 <-> 15:9 <-> 4:3 ) In my avant I cannot get it work using the beo5.

Hello Andy, I see we are both in the same boat now Best regards.

Thank you Keith but I've already tried all the procedure exactly has you described with no success at all. Powering off, full charge, and display on, doesn't change anything. The serial number is automatically detected without problem every time I mount the beo5 in the base. But if I try to update the firmware I always get the 4 screen shots

Peter: My computer merely says the USB device connected has malfunctioned and cannot be recognised. However I've never met this kind of USB problem with my computers.

Yes, I can confirm you Keith, just right now in the beo5 "Product information" screen still appears: Software Version: 1.12a And yes, only the firmware update fails, and all the rest of the configuration file downloading procedure happens 100% correctly every time, In fact inside "counters" section I found: Config. Download (times