PUC steht für Peipheral Unit Controller. Einfach oben rechts die Such-Funktion bemühen. Im Grunde musst du nur den IR Transmitter, der an dem TS klebt, abreissen und an den VU stecken. Dann im Menü des BV7 unter "Anschlüsse" das zu bedienende Gerät von Technisat auf VU ändern, um dann noch die Beo 5 auf das neue

Are you using the shielded Powerlink cables , that are usually delivered with Bl5s? My BL5s were connected to an AV9000 with a BS7000. Everything was working fine. Even the BG CD7000 was directly connected to BL5 via spdif. So, I think your Powerlink cables might be the problem. Try PL MK III. This cable has additional wire on PIN 7. Stefan

Leslie I`ve sent you a pm. Stefan

[quote user="elephant"] [quote user="Razlaw"]Am I missing something? Where does it say wireless for film? [/quote] It doesn't ... you are right: It says "Get full HD video to each TV" ... must be talking about BeoNet [/quote] I think they are talking about the Atlona HDMI matrix and the whole system controlled via MLGW

Yes. AUDIO AUX LINK functions will also work with BV 5, 6, 7, 8, 9, 10... and other Masterlink equipped Beovisions. You will need a Beolink converter 1611and a Masterlink cable. It converts Datalink (Audio Aux Link) to Masterlink. If you get a Beovision with an inbuilt surround decoder, I`d connect all speakers to the Beovision and set BS2300 to A.OPT

Wenn du dir das System nicht ansehen kannst, würde ich mir auf jeden Fall ein Umtauschrecht sichern. Beim Beogram sollte die Mechanik natürlich in Ordnung sein, Aufsatzpunkt/Endabschaltung. Alle Lampen sollten funktionieren. Beim Beomaster kann es schon mal Probleme mit der 2-Wege Funktion geben. Mit welcher FB soll das ganze bedient werden

Yes, there is no AV - A.AUX. Try AV - A.TAPE (A.MEM). Works at least with my BS9000. Or try with BL1000: AV - SHIFT - RADIO. Stefan

Did you try to press: AV - CD /RADIO while watching V.AUX? Now you should listen to your BS3000 with V,AUX picture. Stefan

V.MEM2 gibt es nicht. Nimm mal DVD2 mode. Stefan

Sorry. What we can See on your BS5 screen is exactly what your Beovision should display - but in wrong format. I know there is no BV in your setup.... BM5 has two DVI outputs, just try the other one... Stefan