Graham, Based on your " Problem Statement " outlined I would say that the most likely cause of your problem is EHT (Extra High Voltage) arcing from the tube anode plug or cable from it to the LOPT (Line Output Transformer). This arcing normally occurs due to a build up of dirt which forms a bridge for the high voltage. Because the arcing draws

David, Your AVANT DVD is a Mark II version and the latest software version for both the Mark I & II is 10.4 The Mark III AVANT has a different chassis and runs different software, so the Mark I & II CANNOT be updated with Mark III software meaning I am afraid you cannot upgrade your TV software to provide the facility you are looking for. Sorry

Let me be clear, I am not talking about "plonk and play" installs which I would always expect to be free of charge. I am talking about professionally finished jobs which require drilling for very heavy wall hung displays, implementation of cable ducts as well as the wiring for a basic job, so if a wall hung display was to be mounted and associated

Installations completed by B&O dealers vary a lot depending on several factors including:- How much you are spending on the products If the dealer contracts out some of the installation. If they have their own full time installation team Also, where the product installation requires building/decorating work where they project manage it and have

David, It depends on which version of AVANT you have. If you have a Mark III AVANT DVD (Type numbers 846X) with TV software version 15.1, then you CAN do what you wish. In the above version of TV software B&O implemented a so called SOFT standby setup on STB This feature means that you can decide when, or if, your STB should enter Standby.

Sasha, The IR eye is for IR commands only. In fact there is two types of IR receiver, one with switches and one without. The Beoport IR without switches part number 8087030 looks as below The wiring is as you have seen on Beocentral as below

You are correct that there is a DVB-T/S module for the Beovision 7 and you can receive the "Freesat" stations along with many other "Free-to-air" channels, however it is not packaged for Freesat with the EPG as intended etc.. The STB's for Freesat are intended for only "Freesat" channels.. wtlc2zpx: I think Freesat

I think it is unlikely that there will be any further major updates for the Beocentre 6-26. The Beocentre 6-23 is already being phased out.

I think your will find that there is three (3) rates of VAT in Sweden as follows:- 25% is the standard rate 21% for food 12% for tourists

Congratulations to you, Tom and your lovely new wife