richtoy: I changed the 220uF. I will check and resolder C26. Is this also on the mainboard? Yep. PCB4. mainboard.

Check C102 on the PCB4. This is mentioned in the Serv manual from the AV9000. It becomes lose. There must be a reason why the BU2508 failed. I'm told to cut the wires from the connector on the back of the tube with the deflection coils. Then resolder then directly. The contacts in the connector often fails. This could be one of the reasons why the

Did you replace the 220uF Cap? As I remember you also have to search for smal C26, which comes lose. You can't see it but you have to resolder it. Have you seen the post at the general forum? There is a MX7000 manual on this forum.

You can only enter the service mode by shortcutting the connector on the AV board when the tv gives a picture. Then you can enter several menu's. But when you press TV, does the green leds on the bottom light up for just a second?

By stand-by you mean, you have the red led lluminating? The AV9000 pcb4 (mainboard, powersupply & deflection) is the same as the MX7000.

Peter, I used to have a service doc from a MX7000. But can't find it anymore. Do you have the service manual of the MX7000 in pdf? I know that there were several releases, like the 3393, 7800, 8700 etc. Ik know that some parts from the 7000 are the same as with the AV9000, like the power supply. Best regards, Beobuddy.

DoubleU: Het formaat is zeker niet hetzelfde. DD en DTS zijn gecomprimeerde kanalen, en dat is SACD niet. Bovendien kan de overdracht van SACD van je Denon niet digitaal/coaxiaal naar je Avant plaats vinden. Dat is altijd analoog, met 6 aparte kanalen. Het is inderdaad de Avant die de overdracht beperkt tot alleen DD of DTS signalen. Dat is het enige

flamel: Is there somebody here to answer the other questions I have ? Is there an official & updated B&O list for STB-C code ? Is there a way using the Beo4 to know the current value of the entered code ? Is there a way to know the current STB-C chip version embedeed in the MX ? same with the version of the MX software? is there a way through

BartS: Grotendeels mee eens. Er zijn echter 5.1 SACD's die alle speakers volledig benutten (drums achter). Los van de vraag of dit niet gekunsteld is, ben je dan wel beter uit met 5 gelijke weergevers. Maar ja, B&O biedt (nog) geen SACD. Ergens knaagt het en geeft dit bij mij wat vragen. Als je 5.1 SACD's hebt, in welke format is dat dan

Off Topic Heb je een voorbeeld van zo'n SACD? Heb toevallig een Denon DVD 2930 die ook dergelijke schijfjes aankan. Ben benieuwd hoe dat dan klinkt.