rabble: I am using a four pin to DIN cable, can some please let me know if I am doing something wrong; is there a setting that needs to be changed? If you plug the AUX source to the AUX input, and turn the beomaster to Tape 2, do you still hear the AUX source? If so, then you have connected it to the wrong pins, you should use the output pins... My

dimka: I can not load THIS The main Beoworld site is having some troubles... Try again later!

Have you seen THIS ?

Bare hyggelig, og bra du fikk det til!

Ifølge DENNE tråden kan det være at den er satt i butikkmodus, som reduserer sendestyrken... Som det står i tråden, skal du kunne endre på det ved å trykke Standby + GO, og når velgeren står på Options, trykk 0,0,GO. Og så på Dealer options så kan du endre mellom Normal mode

How did you connect the cables to the TV? Via a scart adapter? It sounds like the usual composite/s-video problem...

Then we'll need someone smarter than me...

Have you checked if AV is in your list already?

Then you have an mk3 Beo4, and you'll have to add AV to List; Press the off button and List at the same time Press list until it says ADD? in the display Press GO Press list until it says AV Press GO Press EXIT When you now press List, AV will show up as one of the alternatives

Olof: Is it possible to connect my computer via Minijack/Chinch cable with a Cinch/Scart adapter and then connect the Scart adapter with my MX 4200 AV Scart In ? Yes! Connect your computer to the scart, and assign that scart to V.tape. When you want to listen to music, just press AV - V.tape on the remote, and then the speakers will turn on, but not