The XML file needs to be in the sub-directory "Thirdparties" and if you extract the XML file from the ZIP file to C:\ it will automatically be placed into the correct B&O Configuration Directory. Once the XML file is in the correct directory go to the PRODUCT section and click the TAB called OTHER and you should see it. Now just drag-n

Whilst I don't have an XML file for the Motorola DCX3200, I did some research on the web and found some Pronto HEX codes which I have converted and made a test XML file. The XML file only has three commands EXIT, GUIDE and ENTER, but if they work on your box I am sure we can find some more. You can down load the file for test HERE

Mirralph, The programme not start in the manner you have described can have many causes. Is this a new Windows 7 Professional installation or is it being used without problems with many other programmes ? If it is not a new Windows 7 installation, then it is likely that there is conflict with something else running. The first thing I suggest you do

As the B&O Configuration Tool uses Microsoft .NET technology, I suggest you check in the control panel of Windows 7 that .NET version 3.5 is installed, if it is not then the configuration tool will not work. If it is not installed, then download and install it from the Microsoft web site, then re-install the Configuration Tool.

A Very Warm Welcome to Beoworld.. To control your Samsung PVR you will need to have an XML control file made which allows it to be added to your Beo5 configuration in the B&O Configuration Tool. Before that XML file can be made, we need to establish the IR (Infra-Red) codes for each command of this unit. These IR codes may be available on the web

Eugenio, Can I suggest you unsolder the resister because the coloured bands may be visible underneath the resistor.

Hello Kevin, I am assuming from your comment that you want a Beo5/6 XML file to control these two products ? I do not have the IR codes for these products, but if you have the original remote controls, the codes can be captured.

I am pleased to report that the network connection to the Beoworld server has been restored

Please be informed that due to a major network failure the Beoworld web site is not currently reachable. The problem first occurred earlier this afternoon and was thought to be fixed, however it failed again and as I write this post the problem remains. This networking issue is effecting several hundred servers, not just the Beoworld server.

[quote user="wasti"]Is there a way to lock the doors in the BeoSound Century?[/quote] Unfortunately, the locking facility implemented on the Ouverture does NOT exist on the Century