I think about 1700 EUR

Yes, that's correct: have a look at: http://www.bang-olufsen.com/specifications?productid=733 BV10-32 only 2 Powerlink connections

Also ich glaube, dass die Bildqualität ziemlich auf gleichen Niveau sein wird. Wesentlicher für die Entscheidung ist aus meiner Sicht zum einen die Verbindungsmöglichkeiten. 3 HDMIs bei BV10 mit der Möglichkeit einen expander zu verwenden. Der BV7 kann einen Projektor betreiben. Zum anderen, wenn der Ton gleiche Bedeutung wie das

I asume you used the V.Tape command to activate the V.tape connector. There might be a matter of SW version. There are circumstances where SPDIF2 Input switches to DECODER socket when Source V.TAPE is assigned to V.Tape connection. Regarding your test using the AV connection: You should assign V.Tape2 instead of non B&O Tape 2. In this case you

Hello David, Which type of device are you connecting to the V.Tape scart? How are the settings in the connection menu? Which coaxial input did you use? hfat

When you set BM1 to work with V.Aux you need an extra IR-Eye to control BM1. This is the reason why it will not work in your Link-rooms. V.AUx is available as link command, but BM1 will not start up as it does not reveive a command. You can use an IR-transmitter to get the IR-Signal from the link room to BM1. I've used this way to get BM1 into link

My Avant is also in Mode 6 no other options are modified. You are shure you use link-av command and not the av command (sorry for the question). My evant behaves the way you describe when I use the av command. Maybe we could compare the SW versions. I can give you mine to morrow morning.

Ich habe ein Kabel mit 10-12 Meter Verlängerung von einem IR-Auge zu einer Lintronic-Box liegen. Hatte vorher eine IR Funk-Verbindung verwendet (bei Conrad gibt es eine mit 435 Mhz Trägerfrequenz, B&O verwendet 455 MHz). Hat nicht sehr zuverlässig funktioniert. Kann die Lösung mit Kabel nur empfehlen. Hat auch den Vortel, dass

You have to change the connection from STB(V.AUX) to V.AUX and use an extra IR-Eye connected to BM1. BM1 can only receive commands via ML if your video or audio masters support PC and N.Music commands. it's not a simple task to control BM1 with IR-Eye using V.AUX from link rooms. You wil have to use some non-B&O equipment. You can store your

Just verfied the suggested procedure on mine, type 8440. Working perfectly. Option 6 meanbs that the avant will work as link slave for audio and video. Which audio and video master do you use? I use a BV10 ans BS3200. When watching local dtv source I link-AV CD and video continues and I hear CD playing. After Linking TV from BV10 I Link-AV TV an hear