werdna: Hi, I'm relocating my Bang & Olufsen BeoVision Avant 32 DVD to Italy. Does anyone know the unlock code to make teh DVD multiregion please? Many thanks, W A very warm welcome to Beoworld As Beoknow stated all of Europe is region 2 and based on your IP address you are in the UK so you should have no problems in Italy.

The diagram below shows how to remove the front cover

Steve, You are correct that B&O uses a carrier frequency of 455KHz for all its modern day remotes. You say you want to integrate other brands of light controllers with your B&O system, but much of this work has already been achieved and therefore you may wish to review these options before looking to make something from scratch. If you are looking

The "044" is the country code which shows that it has the UK software loaded. You are correct that 1.30 is the software version and the latest for the mark I version is 2.5 Your dealer can get it updated, some have the ability to do it themselves, but most will send it to B&O to do.

Steve, If you have Mark II Beocom 6000 handsets which would have the letters INT at the 9'o clock position on the dial then do the following to remove a handset:- Press the centre button and turn dial to SETTINGS then press centre button Turn dial to BASE then press centre button REMOVE HANDSET is shown then press centre button Turn dial to handset

The Beocom 6000 Mark I & Mark II have totally different software and associated menu's and service commands. As it was stated that the phone was a Mark I then to get the software version you need to press DOT 70001 You need at least version 2.4 installed..

TWG: Hi, I've charged it via power supply for about 5h now, it's full and it was recognized on another PC that does NOT have a SIS chipset. BUT: Now the software tells me "Configuration version mismatch (Configuration version mismatch)" when I try to download the configuration to my Beo 5! B&O Configtool Software-Version: 1.02

wtlc2zpx: Any news? You will not hear anything yet, the meeting did not start until 16:30 CET

Peter, The following Topfield boxes are supported:- TF4000PVR TF5000PVR TF5800PVR They are all contained in the Central Europe chip (8344786) B&O split the chips into regions because there was not enough memory space to add them all into one, but you can have any regions chip installed in your AVANT DVD

All the common PVR STB's will support all of your 7 seven requirements via the Beo4. I suggest you review the PVR you plan to buy and come back and we can go through all the functions of that box which are controlled by the Beo4