Don't know why, but there seems to be two different ways they end up. Some just turn to a powder/dust.others seem to go sticky and wet. Craig

Driver were £25 each in the U.K. when I priced some up about 2-3 months ago. Just refoamed my first set, and it was quite easy to do. They sound just as good IMO as if I had fitted new Drivers. Just in the middle of repainting the cabinets at the moment. This would of been easier if I had not refitted the Drivers first, but who likes the easy

Peter : The first thing I would do is change the SCART lead. Tried changing the SCART lead, but it was still the same. Just tried changing the Sky box, and really hoped that would be it. Waited for it to start up, and the problem is still there. Even tried unplugging the IR lead, and operating the Sky box with the buttons on the front. Still have the

[quote user="Dillen"] Marc wrote "...Impatient to know the continuation of the story..." So am I Power up again - wait for the valves to warm up. Changing wavebands now produces a clear crackling and touching the CBL 1 grid cap rewarded me with a somewhat louder buzz. Time to clean the wavechange switch though we will probably never

Have you changed the STB in the setup menu from Sky to Sky+? Craig

1973miller: Hi every one, This is my fist entry to Beo world, i also bought a Beolab 2000 on ebay last week, and am hoping to link it up with my BS3000, The Beolab will be put in the Kitchen. Do i just need a power feed ???, and a Master link connection to my BS3000. I am looking at putting a master link cable around my house, for future equipment,

Midnight Oil - Diesel & Dust. Craig

Nice to see things are going well with this Martin. Craig

Well IMO the correct way looks wrong. If that make any sense. Craig

Glad its not just me that does thing wrong from time to time. Craig