If you have a two-way MX7000 it should be: PICTURE left - right (??) Stefan

No big difference. But I can hear it. You can test that when listening to CD disconnect the spdif and you will hear the analog signal. I think in this configuration the big difference is the BL5 ! Stefan

BV7-40 - Powerlink - BL5 BS9000 - Masterlink - BV7- 40 BS9000 - spdif - BL5 BS9000 in A.OPT 0. BV7-40 in V-OPT 2. BL5 in L-OPT 0 BL5 chooses the digital input, when a digital signal is detected. Volume control works via Powerlink / BV7-40 Stefan

LC2s kann man reparieren (lassen). Wenn du bei 3 Dimmern bleiben willst, lohnt sich das auf jeden Fall. Wenn du sowieso "aufrüsten" willst,kann ich dir Lintronic empfehlen www.lintronic.dk Mit der - 238 Box kannst du so ziemlich alles steuern, z.B. für Licht das Velbus System per RS 232 (nicht teuer, soll aber gut und flexibel sein

Die passiven werden so bei 400 - 500 Euro gehandelt, die aktiven Beolab 5000 liegen schon bei 800 - 1000 Euro. Und das sind sie allemal wert. Behalte sie einfach. Stefan

No. The RF modulator can`t distribute digital signals. Connect your HD device also via composite and analog audio if it is able to send digital and analog signals at the same time. Stefan

You`re welcome. Stefan

Yes I installed everything myself. I just bought Somfy 24V motors, Somfy alu pipes and Somfy power supply, the fabric, relay board and a Beo IR eye. No conrolling devices from Somfy. For the relay board you will find more info here: http://www.lintronic.dk/LinTronic-Relay-108.htm Michael (Lindgaard) made a special firmware, that enables you to control

I have Somfy 24V motors installed in 13 blinds. They can be controlled by Beo4 - 5 with help of the Lintronic relay board in LIGHT mode. I use the color buttons, so I have four groups and I can control my LC2s by LIGHT 1...9. My relay board can also be controlled by the cinema control modul of the BV7-40. You will need the relay board, a 24V power supply

You need a VGA - DVI cable if you have a BV 7-40 MKII. The MKIII got a VGA input. Masterlink and analog audio is also needed. If you have Link-TVs connect the composite-out to composite-in of the Beovision. Beomedia 1 will be conrolled by the BV7 via ML in PC mode. Stefan