I suppose you don't have the tape originally supplied with the Beocord ? Martin

Bor du i nærheden af Storkbh ? Martin

Jacques, just to prevent misunderstandings: Flutter is variations in amplitude (usually tape/tapehead contact related). Wow is variations in frequency (usually tape speed related). Sounds like you have wow rather than flutter since you suspect the motor etc. Martin

You are funny guys Can I win something ? Martin

Det vil virke fint sammen. Du skal nu have monteret de rigtige stik på ledningerne fra højttalerne. Højttalerne har sandsynligvis en markering af fasen (et Plus-tegn eller rød/sort farver), og det er så den røde (positiv), der skal forbindes til det runde ben i stikket og den sorte (negativ), der skal til det

Velkommen til Beoworld ! Beomaster 1000 vil som regel kunne tilsluttes enhver type passiv højttaler - altså højttalere uden indbygget forstærker - uden brug af noget dæmpningsled eller andet. Det er normalt "bare" et spørgsmål om at få de rigtige stik monteret, altså 2-pin DIN højttaler

Looks like a Beomaster 5000 Those PREH trimmers are generally bad. They are used heavily in Beovision LX models where they are also known to cause troubles. If you have no idle current in one channel, you will have to check from the output stage and back to the power supply, including the idle current circuit. The burned R41 on the preamp board (and

The control module is specific to the Beocenter 7000. One from a Beocenter 7002 might work too. I don't remember if the added functions of the 7002 influenced on the processor board. The 7007 and 7700 are all different. Martin

Welcome to Beoworld ! A bit hard to say for sure without actually measuring around a bit and I don't remember the CD3300 by heart but a wild guess would be cracked solder joints, especially in the power supply and voltage regulator areas. I suppose a faulty processor reset circuit could also cause such a symptom. Martin

Jeg er ikke meget for at hænge nogen ud her, men jeg bryder mig heller ikke om at se nogen løbe hovedet mod en mur, så jeg monterer lige min Beoworld Technical Advisor kasket; Der er en stor forhandler af skum-ringe i Holland, han er meget aktiv på Ebay og han har også været her på Beoworld (uden større