I can confirm that you can create a mute button and the code mute_sound is already in the configuration tool

Sal, Only one model of TiVO is supported namely, yes you have guessed it G-TiVO The following Panasonic DVD players can be controlled by the PUC DVD-F87 DVD-S52 XP50 G Panasonic BLU-RAY G Panasonic DVD DVD- RP91K TZ-DZH505

You said:- What is the advantage of using this template for the Rania over the one in the Beo5 Config tool? My response:- The configuration tool does not come with a template for the Rania dimmer, but it does come with Lutron Maestro and Lutron GRX-16IT-WH-2082 templates

I have started to add information related to controlling 3rd party products with the Beo5 to the Beo5 Information Pages HERE To date full details are available for products which use the Philips RC5 protocol including a "generic" template and instructions on how to use it. This protocol is widely used by many manufacturers partularly for European

Weebyx, You said:- Ok, that probably means that all the 3'rd party products in the PUC table will be available to control without the PUC controller, but directly via Beo5, great news, but there is no PUC table for my Denon DVD player :( So it would bee cool to add it myself :) /Weebyx My response is:- The following Denon DVD products are already

You should use only Sanyo Ni-MH batteries model number 3HR-AAAU as replacements in your Beocom 6000. which are available from your B&O dealer. You will see a lot of so called replacement batteries which look the same, but are not. The key difference is their MaH (Milli-amp hour) rating which because the Beocom 6000 power adapter is not a regulated

The issue of what is involved in updating the Beosound 9000 software to support N.MUSIC and N.RADIO has come up several times on this forum and for this reason I have created a Beoworld information page on the subject which can be viewed HERE There is detailed instructions along with pictures to help members who feel able to perform this upgrade. Please

Apparently there was a problem where the region would not change and I am informed using the following sequence should solve the problem:- With the DVD disk tray empty, SELECT DVD If the tray comes out, close it by touching the load field on the set and wait for 15 seconds Select SETUP then Select service mode by pressing STOP STOP GO Select the DVD

I do not think so...

A very warm welcome to Beoworld. Assuming your CD player is NOT a Beogram CD50 then you should connect it to the AUX-CD as shown in the diagram below and you will select the AUX and the display will show AU