I can confirm that DVB-S supports motorised dishes and uses the standard 14-18 control voltage as well as the 22 Khz tone control which conforms to DiSEqC 1.0 spec. It also supports two Conditional Access Common Interface slots PCMCIA It also supports the storing of 5000 TV and 5000 Radio channels

On existing Beovisions you will never be able to have the DVB-T on TV, future Beovisions may be a different story. However, building on your Apple TV proposal, you could use a RF converter from you Apple TV into the RF input (aerial) and program the Beo5 when you press the TV button it also switches on the Apple TV directly from the Beo5 and provides

The following 3rd party XML files have been added to the Beo5 download page HERE and my thanks to Jacob (Weebyx) and Luis in Spain for their assistance for testing these additional files:- Sony Playstation provided you have a Blu-Ray Dongle made by Nyko which can be found HERE Apple Universal iPOD/iTouch docking station remote. This file will also control

I think what you are looking for is HERE

You are correct that the combined unit is only available for Beosystem 3 based products.

STB's which support both DVB-T and DVB-S in the same unit are a fairly recent innovation and I believe the Humax combo 9000 only came out in 2007. Add to this, that generally speaking most users who have satellite such as Sky tend not to have DVB-T unless it is built into the TV itself and equally if you have DVB-T you are less likely to have DVB

If you have a Lintronic converter box, then you can you can use the following instructions to the Lintronic software to get the timings which can then be used to convert to a Beo5 XML file as follows:- Start the Lintronics programme and close the popup status page and if it asks you to check for updates say NO Click PRODUCTS then move down to TT455

I am pleased to inform you that the Beo5 Information Web pages have been updated as follows:- The known issues and observation page has been updated to reflect the observations when using version 1.30 of the Configuration Tool. The FAQ page has been updated. The "Download" page HERE has been updated with a number of 3rd party product templates

Geoff, Sorry, but I left out a couple of "Type" numbers. You should also include in the list 338X and 339X As your software level is version 1.1, this will need to be upgraed to version 2.0 or 2.1 With regards to the STB-C, there is a software version and a table version and it depends what table version you have installed.

Have you looked HERE yet ?