The published B&O spec for the Beovox 1 says Sealed for wet room use up to a maximum temp of 40°C with Humidity of 55% so I guess a Sauna should not be a problem.

E-mail me your Beo5 XML configuration and I will load it into my Beo5 and test it...

To set the ringer volume you need to:- The left and right < > are used to set the volume up and down. To set the volume at a level when a call is received then:- Press MENU then 8 Press ENTER Press and hold > until " ON " is shown in the display then press ENTER Use the < > buttons for the desired volume level then press ENTER

I am pleased to inform members that on the download section of the Beo5 Information and Resource centre HERE I have now added the following 3rd party XML files which supports:- Sony Playstation 3 using the PS3IR-Pro IR to Bluetooth converter from Schmartz which supports all 51 commands plus the ability to switch off the PS3 A Panasonic Plasma TV power

Toast, The two holes you are talking about are as below which also means you have a Mark I handset As Andy has stated, this is for the Service Jig for updating the software as shown below Assuming you know the handset is not faulty, then press DOT 70009 then Centre of the dial

Jonathan, A US Beocom 6000 phone will not work with your Australian base.

Luis, I have checked out your problem using a Beovision 1 in a link room and an AVANT as the master with a camcorder connected to the AVANT. I set up initially a basic configuration on my Beo5 with just the two rooms and added a button for link TV as you stated it and it worked perfectly for me. Both audio and video from the camcorder being feed into

Have you all noted the countdown clock very carefully on www.beosound5.com ? As of 19:30pm UK time tonight the countdown clock showed 7 Days 16 Hours 30 minutes Given that the formal product launch is on Tuesday 11th November in Copenhagen, do we have the correct countdown ?

Mark, In the Beovision 6-26 the Y-Pb-Pr component are NOT active without the HD ready being installed.

The sound and vision via the analogue RF aerial input can be as good as the best analogue TV reception. If you are happy with the quality of the analogue TV picture and sound you have/had, then it would meet your objective.