Hi Austin...well, i'm thinking of plate steel a few mm's thick.......like a shelf...cut to the same shape and dimensions as the side of the CX 100..... Then go to the back of the shelf...and weld an upright there...that would act extend up to the back of both speakers when on their side and stacked... The upright would have holes drilled to

Hi a2bur.... no, actually I was just looking at the wall mounts available via a vendor and it appears to have about a 25 degree tip... If anyone knows for sure what kind (how much) tilt i can do on a BC 9500....that' d be great... Thanks,...

In the upcoming few days, i'm having the horizontal mounts made for the CX100's for the wall AND the welder is making a wall mount to hold the BC 9500 to the wall at a 25 degree down angle... I'm having him make drawings with all measurements in metric and i'll post the pics of the diagrams for the site. You should be able to have a

Thanks Peter... Ok..i'm going to have them weld a small shelf for under the bottom speaker , then a back support that will have holes which line up with the normal mounting holes.. Then put in "expansion" type screws that you use in dry wall to grab the inside of the origional mounting holes and secure to the upright post that comes off

Great story Craig... I remember growing up in the US...with my best friend having an older brother. They were a somewhat wealthy family and always had 2 new cadallac's and a corvette along with a 100 meter home. This was the early 80's when monster receivers (pioneer SX-1980) were out and everyone wanted them. His older brother had the new corvette

Geat Austin.......quick follow up....the back of the speaker is aluminum....yes??? If done with care and extra long screws....we could do all 4 for permanancy.....yes?? thanks again....

Great idea..Austin..!!!.Thanks...I don't have the speakers in front of me...but for added security..I could do all 4 screws per speaker no??? The housings are all aluminum...so that should be strong....yes?? thanks again for your input Austin..!!

Hi guys... I'm having the welder make the wall mount for the CX100 center speakers over the TV... Quick question.. If he makes a mount with hooks (posts) similar to the origional...can we turn them 90 degrees on their SIDE???? ie...... weld a mount..with 1 above the other (LATERAL)...and the hooks going in from the side??? Thanks a TON !!!!

Hey Roy....yep its the Gramophone Shop (303) 744-1284.. Send us a link so we can see the pic of this thing>....Thanks...

Hey Roy...you're not too far from me ...i'm in Colorado..