Oh yes, the dimensions are definitely wrong, too small. Maybe you can give us the correct dimensions ? And maybe a brief description for us to include in the produt guide ? That would be nice. Martin

The remote control function can be disabled on the Beomaster. It's an option setting but I don't remember exactly... I'm sure that someone will know better. Martin

Ja. Og ja. Og de tre stjerner i sidste linie af dit indlæg, skyldes vores filter her på Beoworld. Det ord, du brugte, har en uheldig betydning på engelsk. Martin

You have a PM. (Check your inbox at the extreme top right corner of this page). Martin

Aging capacitors are causing a lot of faults in these lovely machines. A quite comprehensive kit is available (from me), but it does require a good amount of soldering to replace the lot. Of course, it cannot be ruled out that there is another (or more) fault(s) in your Beomaster but the caps would be a good place to start. A lamp kit is also available

Good attitude ! As long as you only touch the sensor pins you'll be fine, trust me. There are no high voltages near the pins. Keep the other hand on your back while touching. Martin

Could be that it wasn't put together correctly, that's very common. Does the volume respond if you touch the little pins (or their solder joints on the backside) with your finger (it should) ? Martin

Yes, those are the transport screws. The platter should rotate when you press the lift button. The deck does not sense the presence of a record or the tightening of the transport screws. If the platter does not spin, check if the motor spins. Martin

Welcome to Beoworld ! What info are you looking for and why do you think that none of the info given in the product guide is correct ? The Beovox 1500 is a rare speaker. It has a pleasant sound for it's age, most likely because it has a considerable size for a 15W speaker. Not a party-speaker but it will sound fine with a Beomaster 900 or similar

It's very common to see the belt falling off if the transport safety screws are tightened. Worth checking. The weight of the platter also plays a role so in some cases, the belt will also slip off if the turntable is run without the platter. Martin