Frank, I have produced an XML file from your Pronto listing which you can download from HERE Please test it and provide feedback..

A Very warm welcome to Beoworld. First, I am assuming that you have already had a look at the Beo5 Information and Resource web pages HERE I am assuming that your Beo5 is currently using firmware 1.34a, if so currently you will need to use soft volume buttons on the screen when using RC5 protocol. I did not really understand your statement which said

Jonnie, It is possible, BUT only if you have one of the following products:- BeoVision 3 - 32 MK III BeoVision 5 - 42 MK III BeoVision Avant - 32 DVD MK III BeoSystem 2 MK II BeoSystem 1 MK II AND they have TV software version 15.1 or above. If you do have 15.1 or above then you can have soft standby setup on STB : This feature means that you can decide

Frank, Well, in that case the XML Generator will produce the correct XML file. Some of the Pronto Hex codes found on the remotecentral.com site are not always correct, so I suggest you post a couple of the HEX codes you found for this product and I will check them.

As with all infra-red remotes, the receiver has to see the signal, so if it is behind the AVANT it is unlikely to see the Beo5 signal. Given, that it is unlikely that you would wish to move the Virgin box from behind the AVANT, then you may wish to purchase a cheap infra-red extender, where you have a small IR transmitter in front of the Virgin box

To increase or decrease the volume which you adjust during a phone call by turning the centre dial.

Frank, I saw you updated your Pentax Camera XML file to the Beo5 web pages, thank you. With regards to your Pioneer DVD-Audio player XML not working, let me first ask what version of the Beo5 Configuration Tool you are using, 1.30 or 2.2 ?

I think you will need to take it back to your dealer. It is true that there appears to be a problem with some batteries fitted to Beo5's

As you have only justed purchased your Beo5 it may have the latest firmware loaded in it, so the first step is to determine which version of firmware you have loaded in your Beo5. To do this, on the Beo5 press hand HOLD the RED DOT button and press the centre button which will take you into the SETUP menu, now press INFO and read the "Software

I would like to wish all Members a Very Happy New Year and I hope it brings you and your families health and happiness in 2009.