No - that I haven't - you're right - the power supply is dodgy. I have the exact symptoms - multiple restarts...

Hi, Anyone know how toopen a Beomedia 1?my disk looks like it is failing, so I'm going to ghost it and put a new one in - but I've been stymied by the case. I've removed all 8 screws from the bottom of the case and while it looks like it should just slide out - it won't. Maybe I'm missing something?

Yes - I am with a Beosystem3 The Dreambox 7000 settings work well with my 7025S.

A 5000 would do the job too - looks like the timer is switched on...

Yes, the cards are easy to get hold of and install - 4 screws and it's like putting in a PCI card. Depending on the panel version that you have you should find the right blade to do the job. I think you are on the west cost of the USA, so try: http://shopbig.com/ty-fb8hm-panasonic/search-html - this is for the 8 and 9-series panel. There is adifferent

Unfortunately you can't easily. The Beovision 4 is a Panasonic plasma panel hidden behind the nice aluminium bezel - control of the panel is via a separate IR sensor which interprets the commands from the BEO4 and sends the commands to a Beosystem which then translates them and sends them to the panel via the RS232 connector (including power on

I'm a bit troubled by this as a lot of people have metered downloads from their ISP. Streaming will start to eat up bandwidth at some rate which may catch people out.

Very good quality and reliability. Depending on the age of the panel it MAY be able to upgrade to HD, via a software update in the Beosystem 2 and a firmware upgrade and blade in the Beovision 4. I'd check with a dealer to see if the serial number denotes it as a D6 or D7 panel - if it is D& then you are laughing. Either way, if you are only

That's a stock shot - I've used similar myself.

Touch screen? I don't think so....