It works perfectly well with my 6 years old avant 32 dvd, we never could do it before with the beo4 and for the last month and a half, we can do it with the beo5; I found it's quite useful indeed, now I can press "eject" from the viewer position and when someone arrives to the tv set 4 meters away with the disc ready in the hand, the tray

Hello The Dane. After almost 5 years using BL6000s as rears in my surround setup, I've changed them for BL3s. The improvement has been really HUGE, in both: with music in "speaker4" double stereo and with films in "speaker5" 5.1 surround. Some reasons for that: position : I was always forced to lift up the BL6000s because some

My beo5 counter shows: Config. Download (times): 134!!! to be continued...

Hi Andy, I had explained that here and here specifically for you!! Read the two last lines (PD)...

Found it!!!! This "Balance..." command is only present for the BV7-40 MKI models !!! I've added it, and now is working perfectly well with my avant Very frustating indeed all those little software glitchs Thank you very much Quim for your precious help PD: this part is specially adressed to my friend Andy (who has avant+beo5 setup) now

Quim43: I'm sure you will find it in BV7 configuration. No success ! I've added a BV7 MKIII but there is not a Balance button in the speaker screen... only a new key named "Optimize"

Quim43: Hi Santiago In the screen, when you touch Speakers, you get all modes you can change (Speakers 1, Speakers 2, etc...). In the same screen or submenú, you have the Balance button. After you touch on Balance button, you will get 2 arrows for Fade (Front-Rear) and Right-Left for balance. Maybe your Balance button is hidden and you have to

Hello everyone, I need HELP AGAIN ! I've troubles to configure my beo5 It's a similar problem I had with the picture formats, about using the 4 arrows control inside a command I cannot do work BALANCE or FADE options with my beo5 (hard keys or screen keys) With Beo4 I use the 4 key arrows inside the SPEAKER command to control those options.

Hello everyone, I need HELP AGAIN ! I've troubles to configure my beo5 It's a similar problem than before, about using the 4 arrows control inside a command I cannot do work BALANCE or FADE options with my beo5 (hard keys or screen keys) With Beo4 I use the 4 key arrows inside the SPEAKER command to control those options... but after several

Oh yes! Now I've understood perfectly well... and you're right Quim. Enjoy!