Luis, Please see my posting later this evening in the general forum under "Beo5 where are we ?"

With regards to compatibility issues between Beo5 Configuration Tool version 1.30 with firmware 1.34a in the Beo5 and the new version 2.2 Configuration Tool with firmware 1.40a loaded into the Beo5, the following points should be noted:- Beo5 Configuration Tool version 2.20 is distributed with firmware 1.40a which will be downloaded to the Beo5 when

It is possible to resolve your problem, but only with the latest version of Beo5 firmware.

The structure and some variables of the XML files for firmware version 1.40a have been changed and in the few days we will be releasing a new version of the Beo5 3rd Party XML Generator which will support this new firmware version and teh previous one. Also, later today I will be updating the Beo5 download section HERE with 3rd party XML files which

In the next few days we will be bring out a new version of the Beo5 3rd Party XML Generator which will correctly create XML files for both the previous version 1.34a and the new version of firmware 1.40a

Assuming your Virgin remote control works perfectly with your Virgin box and you are sure that the STB IR transmitter is correctly placed over the Virgin Boxes IR receiver, then the only assessment can be that the STB controls are not compatible with your STB. As you have the latest chipset in your AVANT and B&O will no longer be providing STB updates

To clarify my previous answer about being able to control the 3rd party product volume with the centre wheel, the simple answer is you CAN, however it is NOT possible to do it with the Beo5 Configuration Tool using RC5 protocol without getting the problems you have discribed. You need the new 1.40a firmware and currently the associated XML file needs

Peter, Did one of us misunderstand his " Problem Statement " you are correct in your statement, but I thought he is talking about leaving the STB on when he switches the TV off.

Frank, I had a closer look at both Pronto codes you sent me and I can see that the first one has the first section missing which defines the carrier frequency and bit size and the second shows the NEC code repeated 4 times except the last part has only half the bitstream, teh rest is missing. From your last captured Pronto code I assembled an XML file

You will need the Beo5 3rd Party XML Generator which can be downloaded if you upgrade to Silver or Gold membership. This program will actually create the required XML and comes with full help.