Hey Skiing. Try deregistering all handsets except one, then re registering them. Their may be a latent handset in there which you don't know about. Andy T.

Welcome to Beoworld! Start of a slippery slope. Soon you'll have a house fuill of B&O! Enjoy your Serenata! Andy T.

Good heavens! Aren't I quick?

Hi Kathy, and welcome to BeoWorld and the UK! Thanks too, for joining as a Gold member and supporting the site. I think a lot depends on what equipment you have. Some older B&O items have a switch on the back to change the voltage. Depending on the wattage of the item, a simple converter can be obtained easily from Maplins or places like this. Let

Hey Jack! Welcome to BeoWorld, and thanks for joining as a silver member. I have no experience with the BS2000/Century, but I have just had a look at the service manual on this site, it's a good one! The "Test Mode" described on page 63 seems to be able to tell you which variant you have. If you haven't downloaded it yet, it's

[quote user="Foghamshire"] If there are no takers nextr step will be freecycle and then the recycling centre. [/quote] Gary! Please don't send these to the recycling center. If you don't have any takers in the next few days, I am interested. What kind of vehicle are you travelling to Leeds in? Andy T.

No Dave. It belongs to Peter, as does the second Beo5. This picture was taken just after the launch of Beo5. Peter was kind enough to lend me his 7000 to help me decide whether to buy one for myself. I did!

I have indeed! It works by the commands "Shift, Phono, and then a number (1 to 16) The first 8 for one box, and 9 to 16 for a second box. The EXT OUT socket is for connecting the second box, so both work with one power supply, and one IR eye (Similar to a MCL IR) Do be careful if not using the original power supply, as the polarity is different

Hi Cal. I have a Loudspeaker Demo switch , that is activated by the Beolink 1000 remote code-- Shift, Phono, and a number 1 to 16. I'm not sure, but I would think SP DEMO would be this. As for Doorcam. Pressing Doorcam Go does send a signal, but when Doorcam 1 is used, my Avant doesn't do anything. However Doorcam 2 registers a 2 on my Avant

The camera never lies... ...or does it?