I have sent you a PM with a download link on Friday

Klas, You can use the Beo5 to control your mini and also add the extra buttons that you wish to use, not just the standard buttons. Klas: happy new year all; I have a MacMini connected to my BS3; i don't have the PUC or the latest BS3 software loaded but will request this from my dealer when i get back....however...following question if possible

Niko, I have had a look at your two BMP files and there is a problem with the data in the file headers in the second byte which describes the type of BMP file it is. What program did you use to produce them ? I have modified both files, so they are now correct and you can download them from HERE So, the image files have caused the program in the Beo5

Based on your feedback, I would say that your Beo5 either has had a failure at the time you added these logos and so you assumed it was the logos which caused the problem or you have used an image format not supported by the Beo5. Are you able to get into the Beo5 Service Menu by pressing the RED DOT and centre button at the same time. If you are able

If the icons are incorrectly formatted it can cause the processor in the Beo5 to crash, if the Beo5 processor is not running, then it cannot respond to USB protocol transmissions from your PC, so there is nothing wrong with your PC. I suggest you take the following actions: Put the icons you have created which have caused the problem into a ZIP file

The network to the Server was down for a short time as you can see from the last part of the network trace below Tracing route to forum.beoworld.org [24.199.232.42] over a maximum of 30 hops: 6 52 ms 24 ms 24 ms ldn-b4-geth11-1-15.telia.net [213.248.100.161] 7 24 ms 22 ms 23 ms ldn-bb2-link.telia.net [80.91.249.133] 8 24 ms 24 ms 23 ms ldn-b3-link.telia

I am not sure I fully understand your question. If you have a DVB-S module currently fitted to your Beovision you CANNOT receive HDTV using it. The DVB-HD Module supports all Free-to-Air service providers as well as the Pay TV providers who are using MPEG2 or MPEG4 compression technology and it also has support for Conditional Access Modules.

I have modified the Apple Icons which now work on ALL versions of firmware, please download the apple logos again from HERE and overwrite the previous versions.

You have raised two issues which are:- The "Continuous" or "Repeat" function is not working The IR range appears to be very low. The "Continuous" or "Repeat" function has been fixed in the firmware, but you need a 3rd Party XML file which makes use of the resolved function before the Beo5 will actually repeat

I wish to inform members that the Beo5 Information and Resource download page HERE has the following XML file added today:- Pioneer DV-646A