beomud: 2) Adding speaker spikes - I don't have speaker spikes, so what I've done is get some AA batteries, and lay them under the BL8000 and BL7-4 (which is standing on the floor at the moment) so it creates a gap between the speakers and the carpeted floor. There is significant improvement in sound. The bass is weaker but much more defined

Is the CD7000 connected to CD on the MCL2AV ? And is the LX5500 connected to TV on the MCL2AV ? Did you try [AV] [CD] ? It is possible to select the MCL2AV connections with a key combination: To select CD press: [AV] [SHIFT] [RADIO] [7] To select TAPE press: [AV] [SHIFT] [RADIO] [6} Use the key combinations above without [AV] If you have speakers connected

I got the A8's (not the Audi) last Wednesday and wanted to thank Lee for this wonderful gift! I hope that they last a lot longer than the Form2 I had. Those kept breaking where they slide to adjust to the head (during the guarantee period always repaired for free by my B&O dealer). Maybe my head's to big for the Form2. At least the A8's

soundproof: Actually found that my Beolink 5000 can also control a number of functions on the TV, but not format. Can you not control "format" with [PICTURE] [1] , [2] or [3] ? I can control "format" on my BV7-40 with [PICTURE] (on a Beolink 1000)

HD DVD is officially dead; Toshiba stops production of defunct format Sunday, February 17, 2008 - 06:32 PM EST "Toshiba Corp is planning to stop production of equipment compatible with the HD DVD format for high-definition video, allowing the competing Blu-Ray camp a free run, public broadcaster NHK reported on Saturday," Nathan Layne reports

soundproof: Peter: As far as Format is concerned, I suppose the likelihood is that Format is a new code invented after the Beolink 5000 - unless we actually have a breakdown of the IR codes and it shows it is using a redundant old code, which would seem unlikely. Yes, I'm certain you're right. Back when Beolink 5000 was launched 4:3 was the

Zwets: which I use in the link room is set up for 2 way on audio and one way on video (otherwise I cannot use the DVD-1 form the main room),somehow is unable to recieve information back from the MX3500. I just says No Contact. I've tried my BL7000 on the MX3500 and this works fine. If your Beolink 5000 is set to one-way for video it can't receive

It depends on what remote you have. If you have the original V-terminal then press [AUX] [2] If you have a Beolink1000 then press [SHIFT] [TV] [2]

Look what they've done. They released the BeoVision 8 in the U.S. without an internal tv-tuner and with SCART connections.

Why not a price for the 5000th member lanan (you see it in some stores where the 10xxxxth guest gets a price)