Maby I have the answer for the P-in-P. I use it with an Avant with a PIP module build in. I have used the following commands (all seperate icons): P-in-P 0:000:TV:PICTURE_IN_PICTURE (green button) Upper left 0:000:TV:CNTL_REWIND (red button) Bottem left 0:000:TV:CNTL_STEP_DW (yellow button) Upper right 0:000:TV:CNTL_WIND (blue button) Bottem right 0

Pictures are on the dutch forum: http://forum.beoworld.org/forums/permalink/151817/149318/ShowThread.aspx#149318 Piet

Last update for anyone who wants to know The solution is replacing the Samsung decoder for an Humax IRHD-5000C. This is working the way it's ment to be. Connected by HDMI to DVI port. Audio is connected from Humax Audio L/R (clinch) to Scart (AV1) of the Beocenter 6. The clinch connection from the BC6-26 seems to work only with YPbPr video connection

It is connected on the YPbPr ports. And thats working fine. But when I bougth the decoder the advice was to connect it digital (HDMI to DVI). It should work, thats what B&O said. And that is my problem. They say: "it works" but it doesn't work. Piet

Your are not the only one with this experience, Sandrikor. But you have the software and can do it by yourself. It will take some time the first programming, but after that you have the experience. If you have question about the programming, put them on the forum. Good luck. Piet

Piet van der Zalm: Because we want digital cable channels on our BC6-26 our dealer adviced us to buy a Samsung DVB H360R decoder and connect it with an HDMI to DVI cable to the TV. Guess what: It doens'n work. No video signal. Does someone know why this is not working? Is there a way to get it working (with the HDMI-DVI cable)? BC26-6 is bought

Sandrikor: And a Last Question... Is It Possible to Save the Configuration that my Beo 5 Have Already and transfer it to my hard disk so i can work on My Current Setup? Instead of Making 1 Setup From Scratch ? Hello Sandrikor, for your information: it is not possible to save the current configuration of the Beo5 to harddisk. You have to get your configuration

Yes, it is a BC6-26, HD-ready. Question is why the decoder is not working. The dealer tried the decoder on a BV7-32 (MK3) --> not working With a BV7-40 --> decoder working perfectly. Why, why why...........who has the answer??? Piet

Thanks TC, I am surprised. So this means that the Samsung decoder needs devices that supports HDCP. Is that the problem? B&O doesn't have a licence for HDCP??? In the decoder manual there is not a word about HDCP. Piet

Because we want digital cable channels on our BC6-26 our dealer adviced us to buy a Samsung DVB H360R decoder and connect it with an HDMI to DVI cable to the TV. Guess what: It doens'n work. No video signal. Does someone know why this is not working? Is there a way to get it working (with the HDMI-DVI cable)? BC26-6 is bought in dec 2007. Type is