[quote user="Premiumverum"] I think you should get those pentas recapped and readjusted! I remember seeing pictures here of a near exploded penta amp power supply that had a buzz and the owner had just kept using it. Your buzz and the pop when you use the light might indicate a PSU running on its last bit of legs. Maybe Dillen can supply a

Thank you very much! I have ordered a new top panel (or I think so, these B&O dealers aren't very fast to respond to emails!). One more quick question; I think the MMC2 on my Beogram 7000 have seen better days. When it's at its recommended stylus pressure, I have to have my finger on it for the sound to be good. When I turn up the stylus

Jepp, det vil fungere!

Thanks for the insight! I bought the speakers and they arrived today - the scratch is much less visible in real life than in the photos! One of the top panels got a dent in transit though, but that's life I guess... BUT! One of the amps makes a bzzzzzing noise when turned on. It's not there when the amp is cold - it comes on after a few hours

Not a bad idea! But I would check the power supply before throwing old routers away - these are often the culprit, and you can get universal adaptors quite cheaply!

Hei! Jeg har ikke vært borti Beoport selv. Men har du husket å koble den analoge lydledningen fra lydkortet på datamaskinen til Beoport? Magnus

[quote user="villarsch"] I have got V.Aux shown on the Beo4, and pressing Go lights the two "stereo" sound lights, but unfortunately there is no response from the Eco Zapbox. Perhaps a further command is required? Villarsch [/quote] Try pressing the number 2 after you have pressed Go!

[quote user="david707"] but Im sure the LX2500 should respond to either v.tape v.tape 2 v.aux or v.aux2. [/quote] Nope! Because the LX2500 and LX2800 were not sold with the Beolink 1000, they were sold with the V terminal . So there were no V.TAPE button! There are 3 AUX inputs on those sets: 1 is the audio input from a stereo, 2 is the Scart

V.tape etc. won't work on an LX2500. The right sequence to open up the scart is <shift> <TV> <2> on Beolink 1000. If you have a Beo4 I believe you must press V.AUX <2>. You get V.AUX by pressing <LIST> until the display reads V.AUX and then press <GO>. If V.AUX is not in the <LIST>-list, you must add it

[quote user="tournedos"] [quote user="Step1"]I am actually trying to work out why I can't remotely turn my main computer off using my laptop at the moment. Can turn on using WOL but not off! Any network heads around?[/quote] Well, you can't. WOL is implemented completely in hardware, while shutdown is a function of your OS